Coal

Special Report

Highlights The path of least resistance for steel, coal and iron ore prices is down over the next 12-24 months. China's "de-capacity" reforms in steel and coal will continue into 2018 and 2019, but the scale and pace of "de-capacity" will diminish. The Mainland's steel and coal output will likely rise going forward as new capacity using more efficient and ecologically friendly technologies come on stream. Both the steel and coal industries in China are becoming more efficient and more competitive, with low-quality output falling and high-quality supply rising. Feature Reducing capacity (also called "de-capacity") in the oversupplied commodities markets (e.g., steel, coal, cement, and aluminum) has been a key priority within China's structural supply side reforms over the past two years. The reforms were announced by President Xi Jinping in November 2015 and have focused primarily on steel and coal, and to a lesser extent on the aluminum and cement sectors. China's "de-capacity" reforms have been aiming to reduce inefficient productive capacity and low-quality output of the above mentioned commodities, as well as boost medium-to-high-quality production. The main focus of this report is to dissect China's supply side "de-capacity" reforms, and to assess their impact on steel, coal and iron ore prices. The de-capacity reforms were announced in late 2015 and, coincidentally, all major industrial commodities prices made a synchronized bottom in late 2015/early 2016 (Chart I-1). Chart I-1ASynchronized Bottom & Rally: ##br##Due To Chinese 'De-Capacity' Reforms? Chart I-1BSynchronized Bottom & Rally: ##br##Due To Chinese 'De-Capacity' Reforms? China is the largest producer and consumer of various raw materials, ranging from steel and coal to base metals. Hence, two interesting questions arise: was it the "de-capacity" reforms or other factors that caused the various raw materials to bottom in early 2016 and rally thereafter? How will China's ongoing "de-capacity" reforms affect steel, coal, and iron ore prices going into 2018 and 2019? Progress Of "De-Capacity" Reforms Three main approaches have been used by policymakers with respect to de-capacity reforms: The government sets up capacity reduction targets and then implements concrete plans to achieve these targets. The government conducts inspections to ensure the reforms are being implemented or for environmental protection purposes. The government aims to eliminate outdated capacity by setting up electricity price rules (higher electricity prices for producers with inefficient technologies) as well as ordering banks to curtail lending to those producers. In terms of timelines, the Chinese supply side "de-capacity" reforms so far have been rolled out in three phases: Phase I: Initiation and preparation phase (2015 Q4 - 2016 H1): The first phase involved policy makers drawing related policies and capacity reduction targets in the steel and coal industries. Local governments and related SOEs began implementing the so-called "de-capacity" reforms. During this period, only 30% of the 2016 capacity reduction targets for both steel and coal markets were achieved. Phase II: The accelerating implementation phase (2016 H2): The second phase included a ramp-up of "de-capacity" reforms, with over 70% of 2016 steel and coal capacity reduction targets being implemented. Meanwhile, steel production disruptions increased due to more stringent environmental rules, more frequent inspections, and government-ordered closures of low-quality steel (called "Ditiaogang" in Chinese) production in Jiangsu and Shandong provinces. Phase III: The reform-deepening phase (2017): The third phase, implemented in the first half of this year, was a clamping down on overcapacity to eliminate all illegal sub-standard steel (Ditiaogang) production and capacity by the end of June 2017. To date, the Chinese authorities have succeeded in their "de-capacity" reforms in steel and coal: both the steel and coal industries in China have become more efficient, more competitive, and have much less obsolete excess capacity: The government's plan was to reduce capacity by 100-150 million metric tons in steel and 1 billion metric tons in coal within "three to five years." This equated to a 9-13% and 18% reduction of existing 2015 Chinese capacity in steel and coal, respectively. In addition, this is equivalent to 7-9% for steel and 10% for coal of 2015's global output (Table I-1). As of August 2017, within less than two years since the beginning of the supply side reforms, 77% of the steel "de-capacity" target (or 10% of 2015 capacity) and 52% of the coal "de-capacity" target (or 7% of 2015 capacity) have been achieved (Table I-1). Table I-1Chinese Supply-Side Reform - Capacity Reduction Target And Actual Achievement With declining capacity and rising production, the capacity utilization rates (CUR) of the steel and coal industries have increased meaningfully. The National Bureau of Statistics (NBS) reported that as of the third quarter of 2017, the CUR for the steel industry has risen to 76.7% (the highest since 2013, and an increase of 4.4 percentage points from a year ago). As for the coal sector, the CUR reached 69% (the highest since 2015, and an increase of 10.6 percentage points from a year ago). With outdated and illegal production capacity exiting the marketplace, the number of companies and the number of employees have declined significantly in both the steel and coal industries (Chart I-2 and Chart I-3). Since the start of the "de-capacity" reforms, the central government has allocated 100 billion yuan (0.1% of GDP and 3.6% of central government spending) to a special fund for the relocation of employees in the coal and steel industries. Chart I-2Consolidation In Chinese Steel ##br##And Coal Sectors: Fewer Companies... Chart I-3...And Fewer Employees Higher prices for steel and coal have greatly boosted producers' profitability. From January 2016 to September 2017, the number of loss-making enterprises as a share of all enterprises has dropped from 25% to 17% in the steel industry and from 34% to 21% in the coal sector. Improving financial conditions have enhanced steel and coal companies' ability to invest in industrial upgrades (i.e., more investment in advanced technologies and new equipment). Bottom Line: Chinese "de-capacity" reforms have been successfully implemented, which has improved economic efficiency in the steel and coal industries by reducing high-cost and low-quality supply, and by increasing lower-cost and high-quality output. Understanding The Cycle In this section, we try to connect the dots between the progress of China's supply side reforms, and steel and coal prices. Chart I-4A and Chart I-4B show the fascinating dynamics among policy actions, production and prices. Chart I-4APolicy Actions And Market Dynamics: Coal Sector Chart I-4BPolicy Actions And Market Dynamics: Steel Sector Here are our major findings: (A) Except for coal, Chinese "de-capacity" reforms were not the major trigger for the price bottom in major industrial commodities in early 2016. As the period from November 2015 to June 2016 was only the initiation stage of the reforms, not much steel capacity reduction - only 1.2% of total existing 2015 capacity - occurred in the first half year of 2016. Moreover, most of the reduced capacity was outdated capacity and probably had been offline for years. Therefore, the policy driven capacity cut in the first half of 2016 was unlikely the reason for the rally in steel prices. The reasons behind the bottom in raw materials prices in general and steel in particular during the first half of 2016 were the following: 1. Production cuts in both 2015 and the first half of 2016 was market-driven. In other words, it was not government reforms but natural market forces (the dramatic drop in raw materials prices in 2015) that caused company closures and declines in various raw materials output in both 2015 and the first half of 2016 (Chart I-4A). The price recovery in the first half of 2016 was not sufficient to make most producers profitable. 2. Remarkably, the authorities injected considerable amounts of credit and fiscal stimulus in late 2015 and early 2016. As a result, demand recovery was another major trigger for the synchronized bottom in early 2016. The rise in the aggregate credit and fiscal spending impulse led to a revival in property construction, automobile production and infrastructure investment in the first half of 2016 (Chart I-5). 3. Financial/speculative demand for commodities was also a driving force behind the early 2016 price recovery. Chart I-6 illustrates that Mainland trading volumes in various commodities futures surged in the first half of 2016, and specifically in coal in the third quarter of 2016, coinciding with their respective price spikes. Chart I-5Strong Demand Recovery In 2016 Chart I-6Speculative Buying In Early 2016 All of these factors contributed to the synchronized price bottom in early 2016 and the consequent price rally in the first half of 2016, in which Chinese "de-capacity" reforms only played a minor role, especially in the steel market. (B) Chinese "de-capacity" reforms were the determining factor for the coal price spike in 2016 and steel price appreciation in 2017. Coal in 2016: "De-capacity" reforms were behind the surge in coal and coke prices throughout 2016. In February 2016, the National Development and Reform Commission (NDRC) stipulated that domestic coal mines could operate no more than 276 working days in one year, down from 330 working days in the past. This was equivalent to the immediate removal of 16% of existing operating capacity off the market. Before this decision, Chinese coal production had already declined 2.5% in 2014 and 3.3% in 2015 (Chart I-4B on page 6). On top of this decision, the government enforced a 250 million metric ton capacity cut target in the coal industry in 2016. Furthermore, actual coal capacity reduction in 2016 was 116% of that year's target (Table I-1). The end result was a 10% decline in Chinese coal production during the period of January and September of 2016 from the same period of 2015, triggering an exponential rise in both thermal coal and coking coal prices (Chart I-1 on page 2). Coking coal is mainly used for coke production, and coke is employed as a fuel in smelting iron ore in a blast furnace to produce steel. Therefore, a shortage of coking coal combined with a revival in steel production made coke the best-performing commodity last year, with its price skyrocketing by 300%. Chart I-7Diverging Prices In 2017 Towards the end of last year, the authorities realized that "de-capacity" in the coal market was too aggressive, and began loosening up coal production restrictions in September 2016. Last November the NDRC further eased policy by allowing companies to operate 330 days a year again (Chart I-4B on page 6). In response to these adjustments, thermal coal, coking coal and coke prices all peaked in December 2016/early 2017 (Chart I-1 on page 2). This reveals how Chinese supply side reforms can be a determining factor for global commodities prices. Steel prices in 2017: Steel prices have exhibited a steady rally throughout 2017, even though prices for coal, coke and iron ore all declined. There has been considerable price divergence this year between steel, on one hand, and coal, coke and iron ore, on the other. Prices for thermal coal, coking coal, coke and iron ore all peaked in late 2016/early 2017, while prices for steel continued to rise and reached a six-year high in September, expanding profit margins for steel producers (Chart I-7). The resilience of steel prices this year was because the Mainland had dismantled all "Ditiaogang" capacity by the end of June 2017, resulting in an accelerated drop in steel products production (Chart I-4A on page 6). "Ditiaogang" is low-quality steel made by melting scrap metal in cheap and easy-to-install induction furnaces. These steel products are of poor quality, and also lead to environmental degradation. "Ditiaogang" is often converted into products like rebar and wire rods. As steel produced this way is illegal, it is not recorded in official crude steel production data. However, after it is converted into steel products, official steel products production data do include it. Both falling steel products production and surging scrap steel exports entail that the "Ditiaogang" capacity elimination policy has been very effective (Chart I-8). Chart I-8The Removal Of 'Ditiaogang' Has ##br##Been Successfully Implemented As reported by the government, about 120 million metric tons per year of "Ditiaogang" capacity has been eliminated, more than double this year's steel "de-capacity" target of 50 million metric tons. A considerable portion of the 120 million metric ton "Ditiaogang" capacity was still in operation early this year when "Ditiaogang" producers enjoyed higher profit margins than large steel producers. This rapid change created a sudden squeeze on steel products supply, which consequently boosted their prices. Bottom Line: China's "de-capacity" reforms have played a major role in driving the rallies in steel prices in 2017 and in the coal markets in 2016. In short, China's supply-side reforms have been effective in shaping prices and boosting efficiency in Mainland industries by eliminating weak/inefficient producers or forcing their industrial upgrade. However, the government efforts at times have also produced large price swings, as in the case of both coal and coke. The Outlook For 2018 And 2019 Given past success and the nation's leadership adherence to reforms, China will firmly proceed with its "de-capacity" reform strategy over the next two years. However, steel and coal prices are likely to decline going forward. The most aggressive phase of "de-capacity" reforms is now behind us. The pace of capacity reduction for both steel and coal will decrease over the next two years as more than half of the 2016-2020 target has already been achieved for both sectors. Both steel and coal producers currently enjoy near-decade high profit margins, and their profits have swelled (Chart I-9A and Chart I-9B). Not surprisingly, steel and coal producers have already sped up their investment in advanced technologies to augment their capacity - by introducing ecologically friendly equipment that can produce medium- to high-end quality products. Chart I-9AStrong Profits For Steel And Coal Producers Chart I-9BRising Profit Margins For Steel And Coal Producers Importantly, the capacity swap policy introduced by the authorities has been allowing steel and coal producers to add new capacity to replace obsolete capacity at a ratio of 1:1-1.25 (the range depends on region). In short, having eliminated the inefficient/outdated capacity, producers are now allowed to add as much capacity as they had before, but using efficient technologies. This will weigh on steel and coal prices as output gains and production costs will likely be lower with new technologies. In addition, Chinese steel producers are accelerating the expansion of advanced electric furnace (EF) capacity. At 6%, current Chinese EF steel output as a share of total steel production is much lower than the same ratio for the major world steel producers and the world average (Chart I-10). The Chinese government's target is to raise the share of EF crude steel production as a share of total production to 15% by 2020. It usually takes at least 1-2 years to build a new EF plant. Hence, newly installed EF capacity will likely come into operation in 2018-'19. On the whole, this points to lower prices for crude steel and steel products. The EF steel-making process only requires scrap steel and electricity to produce crude steel. It does not need either iron ore or coke. This is negative for iron ore and coke prices. With the abundance of used cars and used home appliances in China, the domestic availability of scrap steel has significantly improved over the past few decades. In addition, electricity prices for industrial use have declined by about 5% since March 2015. Therefore, easing resource constraints (availability of scrap steel) and lower electricity costs will facilitate EF steel capacity expansion in China. Some words about the policy-driven steel production cut during the winter season. More than two dozen cities in northern China drew up detailed action plans during September and October to fight the notorious winter smog. China has set a target to reduce the level of Particulate Matter (PM) 2.5 pollution by at least 15% in cities around the Beijing-Tianjin-Hebei region between October 2017 and March 2018. The new rules will require seasonal suspensions or production cuts of steel, aluminum and cement (with the most focus on steel) during the winter heating season from November 15 to March 15. Therefore, over the next four months, downside in steel and coal prices may be limited due to support from these output cuts. This also entails less short-term demand for coke and iron ore, prices for these commodities may remain under downward pressure. Nonetheless, Chinese crude steel output is set to continue rising over the next two years, which in turn will eventually reverse the recent decline in steel products production and assure expansion in steel products production in 2018-'19 (Chart I-11). Chart I-10Chinese Electric Furnace Crude ##br##Steel Production Will Go Up Chart I-11Steel Products Output Will Soon Catch Up For coal, production will accelerate in 2018. The NDRC expects coal production capacity to rise by a net 200 million metric tons this year as increases at more "advanced" mines exceed shutdowns of outmoded facilities. This will be a 50 million metric ton gain over this year's 150 million metric ton obsolete capacity reduction target. In addition, China's coal utilization rate as of the third quarter of 2017 was still below 70%, implying substantial additional capacity remains, potentially boosting coal output, so long as the government does not alter the 330 working-day rule. Importantly, on the demand side, China is aiming to reduce coal usage for electricity generation while promoting renewable energy like hydro, nuclear, wind and solar. This constitutes a structural headwind to coal prices. This is especially significant, given than China accounts for half of global coal consumption. The supply side reforms of the past two years (shutting down inferior capacity) along with the adoption of new, more efficient technologies, has already strengthened the competitiveness of Chinese steel and coal producers. This entails that China will soon resume net exports of steel products, and that its net imports of coal will drop (Chart I-12). This is bad news for international steel and coal producers, who in the past two years have benefited from higher steel and coal prices on the back of a revival in Chinese demand, and curtailed supply. Last but not least, our broad money impulse as well as the aggregate credit and fiscal spending impulse shows that economic growth in general and demand for industrial metals in particular are set to decelerate considerably in the next nine to 12 months or so (Chart I-13). Chart I-12China May Increase Its Net Steel Exports ##br##And Decrease Its Net Coal Imports Chart I-13Demand Is Set To Decelerate Chinese steel and coal markets will determine the direction of coke and iron ore prices, both of which will likely be headed lower as well. Coke: Rising coking coal output as a result of coal production ramping up will increase coke supply sizably. As an increasing share of steel output will come from non-coke-reliant EF capacity, coke demand growth will be constrained. Iron ore: Recovering domestic iron ore production could cap China's imports of iron ore (Chart I-14). First, a marginal rise in profit margins for Chinese iron ore domestic producers and a declining number of loss-generating companies heralds modest upside for iron ore output in China (Chart I-15). Chart I-14Chinese Iron Ore Output Will Rise Chart I-15Chinese Iron Ore Producers: ##br##Marginal Rise In Profit Margins Second, more vertical integration - a rising number of Chinese steel producers that have bought iron ore mines - will result in higher domestic iron ore output. Steel companies' current fat profit margins could prompt them to boost iron ore output from the mines that they have integrated into their production chain. Although profits from iron ore production specifically are likely to be limited. This will be the case especially if the government encourages them to do so. Last year, Chinese iron ore imports accounted for 87% of national total consumption - an all-time high. The authorities dislike such great dependence on resource imports, and the government will likely introduce policies such as reducing taxes for domestic iron ore producers or other efforts to boost domestic production. Bottom Line: China's "de-capacity" reforms in steel and coal will continue into 2018 and 2019, but the scale and pace of "de-capacity" will diminish. The Mainland's steel and coal output will likely rise going forward as new capacity using more efficient and ecologically friendly technologies come on stream. The path of least resistance for steel, coal and iron ore prices is down over the next 12-24 months. Ellen JingYuan He, Editor/Strategist EllenJ@bcaresearch.com Equity Recommendations Fixed-Income, Credit And Currency Recommendations

Highlights Beijing's continued focus on reducing excess industrial capacity in the lead-up to the 19th National Congress of the Communist Party will keep iron ore and steel markets buoyant for the balance of the year. The trajectory of prices further out the curve will, however, depend greatly on how quickly China's reflationary policies wane next year. Energy: Overweight. U.S. gasoline inventories could fall by 7-10mm barrels in the first week following the storm (data to be reported today by the EIA), and another 5-10mm barrels (or more) over the next month, depending on how long it takes to restart all of the refineries knocked offline by Hurricane Harvey, according to estimates in BCA Research's Energy Sector Strategy. Current gasoline inventories sit about 20 million barrels above the 2011-2015 average, which, based on our calculations, could be completely evaporated within a month, materially changing the U.S. gasoline market and related crack spreads.1 Base Metals: Neutral. Following our analysis last month, we are recommending a tactical short Dec/17 COMEX copper position at tonight's close, expecting the market to correct in line with the fundamentals we highlighted.2 Precious Metals: Neutral. We remain long gold as a strategic portfolio hedge. The metal will be supported by low real interest rates and safe-haven demand. The position was recommended May 4, 2017, and is up 8.7%. Ags/Softs: Underweight. Another bumper crop is being priced into corn this year. Expectations for higher corn yields this year - ranging from 166.9 bushels/acre (bpa) to 169.2 bpa vs. 169.5 bpa expected by the USDA - will keep prices under pressure. We remain bearish.3 Feature In reaction to Chinese economic and environmental policies, iron ore and steel each rallied by ~78% in 2016. While steel continued its ascent in 2017 - gaining a further ~20% in the year-to-date (ytd), iron ore broke away from this trend and plummeted by more than 40% between mid-February and mid-June (Chart of the Week). Chart of the WeekSteel And Iron Ore Diverged Earlier This Year Although iron ore has since reversed its path and regained most of the loss, the divergence between steel and the ore from which it is produced comes down to a difference in fundamentals. Increased supplies of iron ore at a time of healthy inventories were bearish in H1. On the other hand, closures of both steel capacity as well as coal capacity kept the steel market tight. While China's supply-side policies have been the force behind the strength in both to date, Chinese demand - which accounts for ~50% of global iron ore and steel consumption, and steel production - will take center stage next year. The speed at which China's reflationary policies wane will determine the long-term trajectory of steel and iron ore markets. Granted while there are some early signs of a potential slowdown in China's economy, we do not expect this to hit metals generally in the near term. As Beijing continues its focus on reducing excess capacity in the steel sector, and as policymakers prepare for the 19th National Congress later this year, we expect steel and iron ore to remain buoyant in H2. China's Steel Production Paradox Eliminating Excess Steel Capacity At The Forefront Of Reform Agenda... The National Development and Reform Commission (NDRC) - China's top economic planning authority - has made clear that reducing overcapacity is at the forefront of its reform priorities. More concretely, Beijing aims to cut steel capacity by up to 100-150mm MT over the five-year period between 2016 and 2020. It has already made progress towards that end - shuttering a reported 65mm MT last year - and is on track to meet its targeted 50mm MT of steel capacity cuts by the end of 2017. Additionally, in January the central government announced its intention to eliminate all steel capacity from intermediate frequency furnaces (IFF) by the end of June 2017. So it is no surprise that steel has been performing so well. However, this narrative is inconsistent with Chinese data. ...Yet Chinese Production Is At All-Time Highs Steel production from China this year has been soaring, growing by more than 5% year-on-year (yoy) in the first seven months of 2017. In fact, latest production data from July came in at 74mm MT, marking a more than 10% yoy increase, and an all-time record high for monthly production (Chart 2). And since ~50% of global steel is produced in China, this has translated into strong global steel production figures in 2017. Production grew by 4.75% yoy in the first seven months of 2017, the most since 2011 and almost five times as much as the five-year average yoy increase for that period. In fact, the China Iron and Steel Association recently announced that the strength in steel prices does not reflect underlying fundamentals and is instead due to speculation and a misunderstanding of the market impact of China's policies. In an effort to deter speculation, China's commodity exchanges implemented several restrictions in August, including increasing margins on futures contracts and limiting positions (Chart 3).4 Chart 2Record Steel Production##BR##Amid Chinese Capacity Cuts Chart 3Pure Speculation Or Not?##BR##Beijing Cracking Down On Market Speculation It Comes Down To The Nature Of IFFs This paradox of record high production at a time of capacity closures comes down to the nature of IFF capacity that was shutdown. While for the most part, old, outdated and unproductive facilities were targeted for closure last year, the shift in focus towards IFFs had a different effect on the market in 2017. IFFs use scrap steel, rather than iron ore, as a raw material, which is melted through an induction furnace to produce low-quality steel. Because this steel fails to meet government specifications for high-quality steel, it is considered "illegal" and, although it is used to satisfy steel demand, it is not included in official production data. Thus, efforts to shut-down these producers are not evident in China's production figures. However, IFF steelmaking capacity is estimated to be 80-120mm MT a year, and accounts for ~10% of steel production capacity in China. In terms of output, this substandard steel accounts for almost 4% of Chinese production. Thus, traditional steelmaking facilities have been required to fill the supply void caused by IFF closures, raising the official production figures. Steel Exports Take A U-Turn As "Illegal" Capacity Is Shuttered Moreover, Chinese exports have reversed their trend and are on the decline. Steel exports registered a ~30% yoy fall in the first seven months of this year (Chart 4). This is further evidence that the capacity closures have had a real impact on actual steel production, and that domestic consumers have turned to steel that is typically exported, in order to fulfill their demand for the metal. Furthermore, as authorities crack down on IFFs, demand for scrap steel - the main raw material in IFFs - has declined. Amid waning demand, scrap steel prices fell by 9% in H1 before regaining almost 6% in July. This follows a ~70% rally last year (Chart 5). Chart 4Exports Are Down As##BR##Capacity Is Shutdown Chart 5Scrap Steel Rally Takes A Break##BR##As Demand From IFFs Eliminated Coking Coal Cost Push As part of its environmental protection plans, China's policymakers announced plans to replace 800mm MT of outdated coal mining capacity with 500mm MT of "advanced" capacity by 2020. Last year, coal-mining capacity closures exceeded the 250mm MT target, reversing the slump in coal prices and leading an almost 225% rally in coke futures. Coking coal, or metallurgical coal, is a key ingredient in the steelmaking process. Although coke dipped since its December high, it has rallied by 34% in the past two months. Thus, Chinese steel mills are now producing in an environment of higher input costs, which will translate to higher prices for the finished good. China's Capacity Closures Likely Peaked Given that China has set June 30, 2017 as the target for eliminating induction furnace-based steelmaking, we do not expect IFF shutdowns to continue impacting the steel market. Additionally, while excess steel capacity is conventionally estimated to be 325-350mm MT in China, the Peterson Institute for International Economics (PIIE) argues that this estimate does not account for the need for a certain amount of excess capacity. Instead, they cite 130mm MT as a more reasonable figure of Chinese excess steel capacity. According to PIIE estimates, this means that by the end of the year, China will have eliminated almost all of its excess capacity, and will be very close to the quantity of capacity closures it aims to achieve by 2020. Consequently, we do not expect shutdowns to continue driving up steel prices. However, plans to halve blast-furnace production at Northern China mills to reduce pollution during the winter will weigh on near term Chinese production and the steel market. Bottom Line: Chinese authorities are closing in on their targeted capacity shutdowns. We do not expect this reduction in capacity to continue impacting steel markets in the long term. Near-term supply dynamics will be driven by efforts to reduce winter pollution. IFF Closures Spur Demand For Iron Ore Chart 6Mid-Year China Inventories At Record High With the elimination of IFFs, which take in scrap steel as the main input, we expect greater demand for iron ore from traditional steel mills as they work toward filling the supply gap left by the loss of the so-called illegal steel. While steel prices have been on a consistent uptrend since 2016, iron ore - which usually moves in tandem with steel - diverged from its main demand market earlier this year, before resuming its rally in Q2. The deviation earlier this year was due to increased supplies from Australia and Brazil amid record levels of Chinese inventories (Chart 6). This has reversed, and iron ore has resumed its climb. Stronger demand for iron ore is consistent with import data, which shows that China has been hungry for Australian and Brazilian iron ore. However, since the average iron ore production cost in China - estimated at more than 60 USD/MT, or roughly three (3) times the cost of iron-ore production in Brazil and Australia - is greater than in other regions, many Chinese mines go offline during periods of low prices. By the same token, elevated prices tempt high-cost Chinese producers back online, increasing global supply. Bottom Line: Since the closure of induction furnaces has shored up demand for iron ore, pulling prices up with it, we do not anticipate further drops in prices. However, if prices remain elevated, increased production from China amid well stocked global markets will keep a tight lid on iron ore prices. Chinese Appetite Will Determine Long-Run Market Performance While steel and iron ore are currently well supported, their near term strength is in large part due to China's reflation policies which have revived demand. Given that it is a sensitive political year, we do not foresee downturns in the Chinese economy this year. Authorities will want to go into the 19th National Congress of the Communist Party in mid-October with solid economic data as a backdrop. However, waning Chinese growth would be a long-run negative for the markets (Chart 7). Specifically, official government data indicate: 1. There are early warning signs that the property market in China may be losing momentum. New floor space started, and new floor space completed contracted in July, while growth in floor space under construction and floor space sold have been easing. Furthermore, while total real estate investment has been growing at an average monthly rate of almost 9% yoy since the beginning of the year, July figures show a marked slowdown, at less than 5% yoy growth. We would not be surprised to see the property market winding down as China begins to tighten its real estate policies. 2. Chinese automobile production has slowed significantly from all-time highs recorded at the end of last year. The monthly average 4% yoy growth in the five months to July is a significant deceleration from the 10% yoy average witnessed during the same period last year. 3. However, infrastructure investment has been strong, recording its all-time high in June, and a 20% yoy increase in July. With the National Congress scheduled in October, we do not expect a slowdown in infrastructure spending this year. In addition, August manufacturing PMI data in China came in above expectations, and registered a slight increase from the previous month (Chart 8). The index has remained relatively stable since the beginning of the year, after gaining strength last year. Chart 7Despite Signs Of Fizzling,##BR##Slowdown Not Expected In 2017 Chart 8Accomodative Policies Will##BR##Keep Near Term Demand Solid Bottom Line: Although we expect China's appetite for steel will begin to wane as the economy unravels from its reflationary policies, steel demand will remain strong in 2017. Chinese authorities will want to ensure solid growth in the run-up to the National Congress scheduled for mid-October. Thus, the near-term focus will remain on supply, and the impact of its reforms on ferrous metals. Post-Harvey Rebuilding Will Spur Steel Demand Hurricane Harvey is expected to impact steel markets in three main ways: 30-35% of all U.S. steel imports come through Port Houston. However, the port resumed operations as of September 1 and there is no longer a threat posed on steel imports. The disruption in freight service resulting from Harvey is expected to temporarily push up trucking rates in the next few weeks. This will give U.S. steel firms, which have long been suffering from cheaper Chinese imports, an advantage and opportunity to fill the demand void which will be bullish for U.S. steel. Harvey will have a longer-run positive impact on steel markets through the demand that will be generated from the infrastructure rebuilding process. Still, increased demand for steel will be partially mitigated by a rise in scrap steel supply, in the aftermath of destruction. While it is still too early to measure the extent of damage and the impact of the rebuilding process on steel markets, estimates from the storm's damage run as high as USD 120 billion. Texas's governor estimated the damage to be much greater - between USD 150-180 billion. This compares to USD 110 billion from Hurricane Katrina, the most devastating storm to hit the U.S. prior to Harvey. Bottom Line: While it is still too early to determine the full extent of destruction, the infrastructure rebuilding phase will spur demand for steel. Roukaya Ibrahim, Associate Editor Commodity & Energy Strategy RoukayaI@bcaresearch.com 1 Please see BCA Research's Energy Sector Strategy Weekly Report "Upgrading Refining Sector As Harvey Clears Out Inventories," published September 6, 2017 It is available at nrg.bcaresearch.com. 2 Please see BCA Research's Commodity & Energy Strategy Weekly Report "Copper's Getting Out Ahead Of Fundamentals, Correction Likely," published August 24, 2017. It is available at ces.bcaresearch.com. 3 Please see "GRAINS - Corn lower as U.S. yield forecasts rise; soy, wheat climb," published by reuters.com on September 1, 2017. 4 Please see "Shanghai exchange urges steel investors to act rationally, hikes fees" published by reuters.com on August 11, 2017. Investment Views and Themes Recommendations Strategic Recommendations Tactical Trades Commodity Prices and Plays Reference Table Trades Closed in 2017 Summary of Trades Closed in 2016

Our strategic and tactical trades were up an average 24.6% in 2016Q2, led by strategic energy recommendations. Going forward, we continue to favor energy exposure over base and precious metals, ags and softs.