Mineral de hierro
Highlights Seasonal capacity restrictions in China during the winter heating months - when pollution from steel mills is particularly high - and continued efforts to limit particulate emissions in major cities will drive steel prices higher. The steel rebar market in China is backwardated, indicating physical markets are tight; inventories have been falling since mid-March. We expect prices to remain elevated going into the winter months, when capacity restrictions kick in. Ongoing capacity reductions in steelmaking will favor higher-grade iron ores, which will widen price differentials versus lower-grade ores. We are recommending a long China rebar futures on the SHFE in 1Q19 vs short 62% Fe iron ore futures on the Dalian DCE in 1Q19 at tonight's close, based on our research. Energy: Overweight. Loadings of Iranian crude are expected to be curtailed beginning this month, as the November 4 deadline for the imposition of U.S. secondary sanctions kick in. Our base case calls for the loss of 500k b/d of exports from Iran; our ensemble forecast includes an estimate of 1mm b/d. Base Metals: Neutral. BHP asked the Chilean government to intervene in the strike called by unions at its Escondida mine. Union officials delayed strike action while talks are being held. Negotiators have until August 14 to reach an agreement. Reuters reported Chile's copper production was up 12.3% y/y in 1H18 to 2.83mm MT.1 Precious Metals: Neutral. U.S. sanctions on trading gold and precious metals with Iran went into effect earlier this week. Ags/Softs: Underweight. Chinese imports of U.S. soybeans could fall 10mm MT over the next year, if pig and chicken farmers switch to lower-protein feed and substitutes like sunflower seeds, and boost local production of the legume, state-run news service Xinhua reported.2 The USDA expects U.S. exports of 55.52mm MT of soybeans in the 2018 - 19 crop year, down 1.22mm MT from last year. Feature Steel prices have performed exceptionally since the beginning of 2Q18, seemingly oblivious to Sino - U.S. trade tensions, a stronger USD, and risks to China's economy roiling other metal markets (Chart of the Week). The MySteel Composite Index we use to track steel prices is up 7% since the beginning of April. With demand growth leveling off, steel's price dynamics highlight the continued relevance of the market's supply-side developments. Most notably, Beijing's battle for blue skies: Winter capacity curbs, and, to a lesser extent, ongoing efforts to retire older, highly polluting capacity will keep prices elevated over the next 9 months. Winter Curbs: China's New Normal As we highlighted in our April 12 weekly, despite the much-ballyhooed reductions in China's steel capacity over the 2017 - 18 winter months, markets in China and globally remained relatively well supplied over the winter.3 However, several key changes this year suggest the impact of these measures will intensify this time around, keeping producers constrained in their ability to ramp up production of the metal. For one, the data suggest strong production levels amid the anti-pollution curbs last winter were a result of an increase in output from regions unaffected by the capacity restrictions (Chart 2). This went a long way in muting the impact of the restrictions in the heavily industrialized Beijing-Tianjin-Hebei region of northern China. Chart of the WeekSteel Oblivious To Pessimism Chart 22017/18 Winter Cuts: A Net Non-Event This year's curbs will broaden the regions targeted by anti-pollution restrictions. The campaign will encompass 83 cities, up from last year's 28, thereby reducing the potential production ramp up from regions not covered by these measures (Chart 3). This coming winter's closures will cover regions where producers traditionally account for 68% of China's steel output (Chart 4). Chart 3Second Annual Winter Capacity ##br##Restrictions Will Broaden Coverage... Chart 4...And##br## Impact The anti-pollution campaign is one of the three battles prioritized in Xi Jinping's plan for the coming years. These curbs will be implemented during the October 1, 2018 to March 31, 2019 heating season, extending the duration from last year's mid-November to Mid-March period. Because the minimal effect observed per last year's closures was due to specifying too narrow a range of plants and regions, not to non-compliance, we expect the measures announced for this coming winter to be fully implemented. These measures come amid already-tight market conditions. The steel rebar market in China is in backwardation - meaning a physical shortage is pushing up prompt prices relative to those further out the curve. Inventories have been falling since mid-March, reflecting supply-demand dynamics in other steel product markets. Thus, we expect prices to remain elevated going into the winter months. Capacity Impacts Are Difficult To Gauge Opaqueness and discretionary authority in the new rules clouds the outlook on how anti-pollution reforms will impact the steel market. This makes it difficult to estimate their impact with precision. This time around, China's State Council announced that curbs will be implemented in a more scientific and targeted approach, ensuring maximum efficiency to attain the targets. This means the constraints this year will depend on emissions in each region, which will be set at the discretion of local authorities.4 For example, steel mills in six key cities including Tianjin, Shijiazhuang, Tangshan, Handan, Xingtai and Anyang will be asked to keep capacity below 50% this winter, while producers in the rest of the Beijing-Tianjin-Hebei region will keep production running at less than 70% of capacity. Furthermore, a draft plan by the city of Changzhou - which planned to implement the curbs beginning August 3 - suggests production curbs may vary by company, depending on operational situations and emission levels.5 These restrictions are applied to capacity, rather than production. Without up-to-date and accurate information on crude steel-making capacity across the different regions, it is extremely difficult to accurately quantify the impact. Specifics of the plans are up to the discretion of local authorities. Thus, these restrictions can be applied to different stages in the steel-making process (Diagram 1), impacting furnaces, pig iron or sintering plants. In some cases, the output curbs are not only restricted to the winter heating months. Several regions have been implementing curbs throughout the year on an as-needed basis. The cities of Tangshan and Changzhou are two such examples, implementing restrictions during the summer months as well. Furthermore, all industrial plants in the city of Xuzhou remain shut. High profit margins at steel mills may incentivize the shuttered illegal furnaces to restart. The industry ministry acknowledges this threat, and claims it will carry out checks on these producers to ensure they do not come back online. Diagram 1Steelmaking Production Process: Restrictions Can Be Applied To Different Stages Without full knowledge of these details, quantifying the impact of these restrictions is a challenge. Morgan Stanley estimates the impact of these curbs on steel output to be 78mm MT during the winter period by assuming capacity utilization is restricted to 50% in the key cities, while the rest of the areas cut capacity by 30%. The estimated production loss from these restrictions accounts for 9% of China's 2017 crude steel output.6 China's Ongoing Capacity-Reduction Reforms Most of the planned permanent capacity shutdowns have already taken place. Of the targeted 150mm MT of cuts between 2016 and 2020, 115mm MT have already taken place over the past two years. Furthermore, 1H17 witnessed the closure of all illegal induction furnaces producing sub-par quality steel, estimated to account for 140mm MT of crude steel capacity (Table 1).7 Table 1De-Capacity Reforms Still Ongoing We expect the magnitude of cutbacks to slow considerably. Even though the industry ministry issued a statement in February that it plans to meet steel capacity reduction targets this year - two years ahead of schedule. Furthermore, mills face restrictions on new steel capacity. China's State Council announced it intends to prevent new steel capacity additions in the Beijing-Tianjin-Hebei, Guangdong province, and Yangtze River Delta regions, and a cap set at 200mm MT in Hebei by 2020. The capacity replacement plan, which allows a maximum of 0.8 MT of new capacity for each MT of eliminated capacity, will ensure capacity does not grow going forward. In fact, not all mills are eligible to take advantage of the replacement policy. Among others, now-shuttered induction furnace capacity, as well as producers that previously benefited from cash and policy support will not meet the requirements for this program. Steel And Iron Ore Prices Will Not Reconverge As a result of China's reform policies in the steel industry, iron ore prices have diverged from steel. Reduced steel production lowers demand for raw materials, including iron ore. This is reflected in falling Chinese iron ore imports amid contracting production (Chart 5). Chart 5Weak Demand For Iron Ore Chart 6EAF Penetration In China: Still Some Catching Up To Do China's reform and anti-pollution campaigns have had serious consequences on iron ore markets. For starters, China is encouraging the adoption of electric arc furnaces (EAF), rather than additional new blast furnaces.8 While the latter primarily uses iron ore, the former uses scrap steel. EAF penetration in China's steel industry significantly lags the rest of the world (Chart 6). This means that even if the capacity-replacement program allows eliminated furnaces to be replaced with newer, more up-to-date capacity, this will not spur demand for iron ore. Instead, we expect to see higher scrap steel prices (Chart 7). Furthermore, as we first highlighted in our January report, China's anti-pollution campaign coupled with high steel profit margins has incentivized the use of higher grade iron ore and iron ore pellets, widening the price spread between high- and low- grade ores (Chart 8).9 Chart 7EAFs Support Scrap Steel Demand Chart 8IO Grade Premiums Will Remain Elevated While high-grade ores are more expensive, they emit less pollution in the steelmaking process. Similarly, unlike fines, pellets which are direct charge feedstock, are not required to undergo the highly polluting sintering stage and can be fed directly into the furnace. China's Steel Dynamics Overshadow Global Markets The ongoing supply-side reforms in China are overshadowing events in other markets. Globally, steel is expected to remain in physical deficit this year (Chart 9). This is largely on the back of an increase in world ex-China demand, and the decline in Chinese supply, despite expectations of weaker Chinese demand, and increased supply from the rest of the world (Table 2). Chart 9Physical Steel Deficit Will Persist... Table 2...Despite Weaker Chinese Demand And Stronger RoW Supply These figures do not consider the impact of the ongoing Sino - U.S. trade dispute, which could evolve into a full-blown trade war, weighing on EM incomes and demand. In such a scenario, global demand for steel would take a hit, potentially shifting global markets into surplus. In theory, trade barriers on U.S. steel imports could lead to weaker domestic supply for American users and at the same time, leave more of the metal for use by the rest of the world. The net effect of that would be a higher price for American steel relative to the rest of the world. However, since May, 20,000 requests for steel tariff exemptions have been filed in the U.S., of which the Commerce Department has denied 639. To the extent that American steel users are able to obtain tariff exemptions, the impact of the barriers on global steel markets will be muted. Bottom Line: We expect China's steel market to tighten as we go into the winter season, during which capacity cuts will be broadened to 82 cities, from last year's 28. This will keep steel prices elevated. At the same time, we expect prices of 62% Fe material and lower iron ore grades to weaken, as appetite for the steelmaking raw material contracts during these months. Mills still running in the mid-November to mid-March period will have a preference for higher-grade ores and pellets, keeping premiums on these grades elevated. Barring a significant demand-side shock, expect more upside to steel prices and downside to iron ore prices over the coming 9 months. Based on our research, we are recommending a long China rebar futures on the SHFE in 1Q19 vs. short 62% Fe iron ore futures on the Dalian DCE in 1Q19 at tonight's close. Roukaya Ibrahim, Editor/Strategist Commodity & Energy Strategy RoukayaI@bcaresearch.com 1 Please see "BHP asks for government mediation in talks at Chile's Escondida," published August 6, 2018, by uk.reuters.com. 2 Please see "Economic Watch: China can cut soybean imports in 2018 by over 10 mln tonnes," published August 5, 2018, by xinhuanet.com. 3 Please see Commodity & Energy Strategy Weekly Report titled "Chinese Steel, Aluminum Markets Well Supplied Despite Winter Capacity Cuts," dated April 12, 2018, available at ces.bcaresearch.com. 4 Please see "Chinese steel output cuts to vary from mill to mill next winter," dated July 21, 2018, available at reuters.com. 5 The restrictions will not only apply to the city's steel mills, but also to copper smelters, chemical makers as well as cement producers. Please see "China's Changzhou plans to enforce output curbs in steel, chemical plants," dated July 30, 2018, available at reuters.com. 6 Please see "Shanghai steel resumes rise, coke rallies as China eyes winter curbs," dated August 2, 2018, available at reuters.com. 7 Low-quality steel produced by induction furnaces, also referred to as ditiaogang, is made by melting scrap steel using induction heat, preventing sufficient control over the quality of the steel. Platts estimates ditiaogang production in 2016 to be 30-50mm MT. As we explain in our September 7, 2017 Weekly Report titled "Slow-Down In China's Reflation Will Temper Steel, Iron Ore In 2018," given that ditiaogang is illegal, these closures are not reflected in official steel production figures. Thus the closures of these mills have no impact on actual steel production, but instead raise the capacity utilization rates for Chinese steel producers. 8 China launched a carbon trading system in January 2018, which penalizes blast furnace operators with higher environmental taxes relative to EAF processes. 9 Please see Commodity & Energy Strategy Weekly Report titled "China's Environmental Reforms Drive Steel & Iron Ore," dated January 11, 2018, available at ces.bcaresearch.com. Investment Views and Themes Recommendations Strategic Recommendations Tactical Trades Commodity Prices and Plays Reference Table Trades Closed in 2018 Summary of Trades Closed in 2017
Highlights Several economic and financial market indicators point to a budding downtrend in Chinese capital spending and its industrial sector. The recent underperformance of global mining, chemicals and machinery/industrials corroborate that capital spending in China is starting to slump. Shipments-to-inventory ratios for Korea and Taiwan also point to a relapse in Asian manufacturing. This is occurring as our global growth sentiment proxy sits on par with previous peaks, and investor positioning in EM and commodities is overextended. Stay put on EM. Markets with currency pegs to the U.S. dollar, such as the Gulf states and Hong Kong, will face tightening local liquidity. Share prices in these markets have probably topped out. Feature On the surface, EM equities, currencies and local bond and credit markets are still trading well. However, there are several economic indicators and financial variables that herald negative surprises for global and Chinese growth. In particular: China's NBS manufacturing PMI new orders and backlogs of orders have relapsed in the past several months. Chart I-1 illustrates the annual change in new orders and backlogs of orders to adjust for seasonality. The measure leads industrial profits, and presently foreshadows a slowdown going forward. Furthermore, the average of NBS manufacturing PMI, new orders, and backlog orders also points to a potential relapse in industrial metals prices in general as well as mainland steel and iron ore prices (Chart I-2). The message from Charts I-1 and I-2 is that the recent weakness in iron ore and steel prices could mark the beginning of a downtrend in Chinese capital spending. While supply cuts could limit downside in steel prices, it would be surprising if demand weakness does not affect steel prices at all.1 Chart I-1China: Slowdown Has Further To Run Chart I-2Industrial Metals Prices Have Topped Out Although China's money and credit have been flagging potential economic weakness for a while, the recent manufacturing PMI data from the National Bureau of Statistics finally confirmed an impending deceleration in industrial activity and ensuing corporate profit disappointment. Our credit and fiscal spending impulses continue to point to negative growth surprises in capital spending. The latter is corroborated by the weakening Komatsu's Komtrax index, which measures the average hours of machine work per unit in China (Chart I-3). In both Korea and Taiwan, the overall manufacturing shipments-to-inventory ratios have dropped, heralding material weakness in both countries' export volumes (Chart I-4). Chart I-3Signs Of Weakness In Chinese Construction Chart I-4Asia Exports Are Slowing Notably, global cyclical equity sectors that are leveraged to China's capital spending such as materials, industrials and energy have all recently underperformed the global benchmark (Chart I-5). Some of their sub-sectors such as machinery, mining and chemicals have also begun to underperform (Chart I-6). Chart I-5Global Cyclicals Have ##br##Begun Underperforming... Chart I-6...Including Machinery ##br##And Chemical Stocks Among both global and U.S. traditional cyclicals, only the technology sector is outperforming the benchmark. However, we do not think tech should be treated as a cyclical sector, at least for now. In brief, the underperformance of global cyclical equity sectors and sub-sectors following last month's equity market correction corroborate that China's capital spending is beginning to slump. Notably, this is occurring as our global growth sentiment proxy rests on par with its previous apexes (Chart I-7). Previous tops in this proxy for global growth sentiment have historically coincided with tops in EM EPS net revisions, as shown in this chart. Chart I-7Global Growth Sentiment: As Good As It Gets All told, we may be finally entering a meaningful slowdown in China that will dampen commodities prices and EM corporate earnings. The latter are still very strong but EPS net revisions have rolled over and turned negative again (Chart I-8). Chart I-8EM EPS Net Revisions Have Plummeted EM share prices typically lead EPS by about nine months. In 2016, EM stocks bottomed in January-February, yet EPS did not begin to post gains until December 2016. Even if EM corporate profits are to contract in the fourth quarter of this year, EM share prices, being forward looking, will likely begin to wobble soon. Poor EM Equity Breadth There is also evidence of poor breadth in the EM equity universe, especially compared to the U.S. equity market. First, the rally in the EM equally-weighted index - where all individual stocks have equal weights - has substantially lagged the market cap-weighted index since mid 2017. This suggests that only a few large-cap companies have contributed a non-trivial share of capital gains. Second, the EM equal-weighted stock index's and EM small-caps' relative share prices versus their respective U.S. counterparts have fallen rather decisively in the past six weeks (Chart I-9, top and middle panels). While the relative performance of market cap-weighted indexes has not declined that much, it has still rolled over (Chart I-9, bottom panel). We compare EM equity performance with that of the U.S. because DM ex-U.S. share prices themselves have been rather sluggish. In fact, DM ex-U.S. share prices have barely rebounded since the February correction. Third, EM technology stocks have begun underperforming their global peers (Chart I-10). This is a departure from the dynamics that prevailed last year, when a substantial share of EM outperformance versus DM equities was attributed to EM tech outperformance versus their DM counterparts and tech's large weight in the EM benchmark. Chart I-9EM Versus U.S. Equities: Relative ##br##Performance Is Reversing Chart I-10EM Tech Has Started ##br##Underperforming DM Tech Finally, the relative advance-decline line between EM versus U.S. bourses has been deteriorating (Chart I-11). This reveals that EM equity breadth - the advance-decline line - is substantially worse relative to the U.S. Chart I-11EM Versus U.S.: Relative Equity Breadth Is Very Poor Bottom Line: Breadth of EM equity performance versus DM/U.S. has worsened considerably. This bodes ill for the sustainability of EM outperformance versus DM/U.S. We continue to recommend an underweight EM versus DM position within global equity portfolios. Three Pillars Of EM Stocks EM equity performance is by and large driven by three sectors: technology, banks (financials) and commodities. Table I-1 illustrates that technology, financials and commodities (energy and materials) account for 66% of the EM MSCI market cap and 75% of MSCI EM total (non-diluted) corporate earnings. Therefore, getting the outlook of these sectors right is crucial to the EM equity call. Table I-1EM Equity Sectors: Earnings & Market Cap Weights Technology Four companies - Alibaba, Tencent, Samsung and TSMC - account for 17% of EM and 58% of EM technology market cap, respectively. This sector can be segregated into hardware tech (Samsung and TSMC) and "new concept" stocks (Alibaba and Tencent). We do not doubt that new technologies will transform many industries, and there will be successful companies that profit enormously from this process. Nevertheless, from a top-down perspective, we can offer little insight on whether EM's "new concept" stocks such as Alibaba and Tencent are cheap or expensive, nor whether their business models are proficient. Further, these and other global internet/social media companies' revenues are not driven by business cycle dynamics, making top-down analysis less imperative in forecasting their performance. We can offer some insight for technology hardware companies such as Samsung and TSMC. Chart I-12 demonstrates that semiconductor shipment-to-inventory ratios have rolled over decisively in both Korea and Taiwan. In addition, semiconductor prices have softened of late (Chart I-13) Together, this raises a red flag for technology hardware stocks in Asia. Chart I-12Asia's Semiconductor Industry Chart I-13Semiconductor Prices: A Soft Spot? Finally, Chart I-14 compares the current run-up in U.S. FANG stocks (Facebook, Amazon, Netflix and Google) with the Nasdaq mania in the 1990s. An equal-weighted average stock price index of FANG has risen by 10-fold in the past four and a half years. Chart I-14U.S. FANG Stocks Now ##br##And 1990s Nasdaq Mania A similar 10-fold increase was also registered by the Nasdaq top 100 stocks in the 1990s over eight years (Chart I-14). While this is certainly not a scientific approach, the comparison helps put the rally in "hot" technology stocks into proper historical perspective. The main take away here is that even by bubble standards, the recent acceleration in "new concept" stocks has been too fast. That said, it is impossible to forecast how long any mania will persist. This has been and remains a major risk to our investment strategy of being negative on EM stocks. In sum, there is little visibility in EM "new concept" tech stocks. Yet Asia's manufacturing cycle is rolling over, entailing downside risks to tech hardware businesses. Putting all this together, we conclude that it is unlikely that EM tech stocks will be able to drive the EM rally and outperformance in 2018 as they did in 2017. Banks We discussed the outlook for EM bank stocks in our February 14 report,2 and will not delve into additional details here. In brief, several countries' banks have boosted their 2017 profits by reducing their NPL provisions. This has artificially boosted profits and spurred investors to bid up bank equity prices. We believe banks in a number of EM countries are meaningfully under-provisioned and will have to augment their NPL provisions. The latter will hurt their profits and constitutes a major risk for EM bank share prices. Energy And Materials The outlook for absolute performance of these sectors is contingent on commodities prices. Industrial metals prices are at risk of slower capex in China. The mainland accounts for 50% of global demand for all industrial metals. Oil prices are at risk from traders' record-high net long positions in oil futures, according to CFTC data (Chart I-15, top panel). Traders' net long positions in copper are also elevated, according to the data from the same source (Chart I-15, bottom panel). Hence, it may require only some U.S. dollar strength and negative news out of China for these commodities prices to relapse. Chart I-15Traders' Net Long Positions In ##br##Oil And Copper Are Very Elevated How do we incorporate the improved balance sheets of materials and energy companies into our analysis? If and as commodities prices slide, share prices of commodities producers will deflate in absolute terms. However, this does not necessarily mean they will underperform the overall equity benchmark. Relative performance dynamics also depend on the performance of other sectors. Commodities companies could outperform the overall equity benchmark amid deflating commodities prices if other equity sectors drop more. In brief, the improved balance sheets of commodities producers may be reflected in terms of their relative resilience amid falling commodities prices but will still not preclude their share prices from declining in absolute terms. Bottom Line: If EM bank stocks and commodities prices relapse as we expect, the overall EM equity index will likely experience a meaningful selloff and underperform the DM/U.S. benchmarks. Exchange Rate Pegs Versus U.S. Dollar With the U.S. dollar depreciating in the past 12 months, pressure on exchange rate regimes that peg their currencies to the dollar has subsided. These include but are not limited to Hong Kong, Saudi Arabia and the United Arab Emirates (UAE). As a result, these countries' interest rate differentials versus the U.S. have plunged (Chart I-16). In short, domestic interest rates in these markets have risen much less than U.S. short rates. This has kept domestic liquidity conditions easier than they otherwise would have been. However, maneuvering room for these central banks is narrowing. In Hong Kong, the exchange rate is approaching the lower bound of its narrow band (Chart I-17). As it touches 7.85, the Hong Kong Monetary Authority (HKMA) will have no choice but to tighten liquidity and push up interest rates. Chart I-16Markets With U.S. Dollar Peg: ##br##Policymakers' Maneuvering Window Is Closing Chart I-17Hong Kong: Interest ##br##Rates Are Heading Higher In Saudi Arabia and the UAE, the monetary authorities have used the calm in their foreign exchange markets over the past year to not match the rise in U.S. short rates (Chart I-18A and Chart I-18B). However, with their interest rate differentials over U.S. now at zero, these central banks will have no choice but to follow U.S. rates to preserve their currency pegs.3 Chart I-18ASaudi Arabian Interest Rates Will Rise Chart I-18BThe UAE Interest Rates Will Rise If U.S. interest rates were to move above local rates in Saudi Arabia and the UAE, those countries' currencies will come under considerable depreciation pressure because capital will move from local currencies into U.S. dollars. Hence, if U.S. short rates move higher, which is very likely, local rates in these and other Gulf countries will have to rise if their exchange rate pegs are to be preserved. Neither the Hong Kong dollar nor Gulf currencies are at risk of devaluation. The monetary authorities there have enough foreign currency reserves to defend their respective pegs. Nevertheless, the outcome will be domestic liquidity tightening in the Gulf's and Hong Kong's banking system. In addition, potentially lower oil prices will weigh on Gulf bourses and China's slowdown will hurt growth and equity sentiment in Hong Kong. All in all, equity markets in Gulf countries and Hong Kong have probably seen their best in terms of absolute performance. Potential negative external shocks and higher interest rates due to Fed tightening have darkened the outlook for these bourses. Bottom Line: Local liquidity in Gulf markets and Hong Kong is set to tighten. Share prices in these markets have probably topped out. However, given these equity markets have massively underperformed the EM equity benchmark, they are unlikely to underperform when the overall EM index falls. Hence, we do not recommend underweighting these bourses within an EM equity portfolio. For asset allocators, a neutral or overweight allocation to these bourses is warranted. Arthur Budaghyan, Senior Vice President Emerging Markets Strategy arthurb@bcaresearch.com 1 Please see Emerging Markets Strategy Special Report "China's "De-Capacity" Reforms: Where Steel & Coal Prices Are Headed," dated November 22, 2017; the link is available on page 16. 2 Please see Emerging Markets Strategy Special Report "EM Bank Stocks Hold The Key," dated February 14, 2018; the link is available on page 16. 3 Please see BCA's Frontier Markets Strategy Special Report "United Arab Emirates: Domestic Tailwinds, External Headwinds," dated March 12, 2018. The link is available on fms.bcaresearch.com. Equity Recommendations Fixed-Income, Credit And Currency Recommendations
Puntos destacados
Las reformas medioambientales en China continúan reduciendo la capacidad siderúrgica. El cierre de instalaciones de inducción ilegales en China también está ajustando los mercados. Aunque la producción oficial de acero en China es más alta, esto probablemente refleja el hecho de que la producción de los molinos de inducción ilegales no se registraba —y por tanto no se contabilizaba— mientras que la producción de los molinos legales está aumentando para cubrir el vacío dejado por los cierres.
Los beneficios de los acereros están aumentando de forma pronunciada, lo que significa que la demanda de mineral de hierro en China se mantendrá firme al menos durante la 1S18. El cobre ha estado bien demandado desde junio de 2017, tras interrupciones en la oferta y un fuerte crecimiento de la demanda impulsado por la recuperación económica mundial. Esperamos que obtenga un impulso adicional en la 1S18, ya que los trabajos de cableado y fontanería en proyectos de construcción que ahora absorben acero en China se pondrán en marcha. Más adelante, el crecimiento global compensará cualquier desaceleración en China.
Nuestro análisis indica que el mercado mundial del acero se estrechará en la 1S18, como ya está ocurriendo en China. En consonancia con esto, estamos abriendo una posición táctica larga en futuros de barras corrugadas de acero Mar/18 en la Bolsa de Futuros de Shanghai, que se cotizan en RMB/ton. Incluimos un stop loss del 10% en esta recomendación.
Energía: Sobreponderar. Nuestra visión sobre el petróleo, que antaño estaba fuera del consenso, es ahora el consenso, por lo que estamos tomando ganancias en opciones spread alcistas sobre Brent y WTI $55 vs. $60/bbl para entrega en mayo y julio al cierre de esta noche. Estas posiciones registraron ganancias de 109.2% y 123.5% al cierre del martes. Cualquier caída ofrecerá una oportunidad para restablecer posiciones largas a lo largo de estas curvas a futuro.
Metales básicos: Neutral. El cobre seguirá estando bien demandado este año mientras continúe la recuperación económica mundial. Un gran número de renegociaciones de contratos en minas constituye un riesgo adicional al alza para los precios del cobre este año.
Metales preciosos: Neutral. Dada nuestra expectativa de cuatro subidas de tipos por parte de la Fed, es difícil ser demasiado optimistas con el oro. Sin embargo, cualquier indicio de que el banco central se incline hacia una postura más dovish —particularmente si no vemos una inflación más alta este año— hará repuntar el metal.
Ags/Softs: Infraponderar. Los mercados se mantendrán en compás de espera hasta el WASDE del USDA del viernes. Mantenemos una infraponderación, excepto en maíz.
Artículo principal
Gráfico de la semana
El mineral de hierro y los precios del acero se desviaron en 2017
Los precios del mineral de hierro y del acero divergieron en 2017
Los precios del mineral de hierro y del acero divergieron en 2017
Las acciones de política medioambiental de China han reducido la capacidad siderúrgica mundial en 100 mm MT entre la 1S16 y la 1S18. Esto es más visible en los precios del acero chinos, que ganaron más del 30% en 2017, tras un aumento de casi el 80% en 2016. La ganancia total en los precios del acero desde el inicio del enfoque de Pekín en las reformas del mercado del acero es un contundente 135%.
Los precios del mineral de hierro registraron ganancias similares a las del acero en 2016, pero se desviaron bruscamente en 2017, desplomándose más del 40% entre mediados de marzo y mediados de junio, terminando casi un 8% por debajo interanual (interanual) (Gráfico de la semana). Los precios del acero en alza dispararon los márgenes de beneficio en los molinos chinos, lo que, por supuesto, se tradujo en demanda de mineral de hierro, el ingrediente crítico para la fabricación de acero en China, hacia finales de año: los precios del mineral de hierro subieron un 20% en los dos últimos meses de 2017.
¿Cómo llegamos hasta aquí? Un resumen de las reformas del sector siderúrgico de China
Como parte de sus reformas destinadas a reducir la contaminación del aire eliminando capacidad industrial obsoleta y excesiva, Pekín se comprometió a eliminar entre 100-150 mm MT de capacidad siderúrgica durante el período 2016-2020. Hasta la fecha ha cerrado una estimada capacidad de 100 mm MT.
Además de estas reformas, Pekín se comprometió a cerrar los pequeños hornos de inducción en China, que funden chatarra y producen acero de mala calidad. Se estima que estos hornos de inducción representan entre 80-120 mm MT de capacidad anual, aunque su producción real es mucho menor: produjeron entre 30-50 mm MT en 2016, según S&P Global Platts.1 Esto es menos del 7% de la producción total de acero crudo de China.
Los recortes de producción de los molinos de inducción no son evidentes en los datos oficiales: las cifras de producción de acero crudo de China han seguido aumentando en medio de estos recortes, como discutimos en investigaciones anteriores (Gráfico 2).2 Los datos del International Iron and Steel Institute muestran que la producción mundial de acero alcanzó un récord en los primeros 11 meses de 2017, aumentando más del 5% interanual. Asimismo, la producción de acero crudo de China —que representa el 50% de la producción mundial— alcanzó su punto máximo en agosto: la producción en el mismo período fue la más alta registrada, aumentando un 5.28% en comparación con el mismo período de 2016.
Esta paradoja de la producción puede atribuirse al hecho de que muchos hornos de inducción chinos son ilegales y, como resultado, su producción no se contabiliza en los datos oficiales de producción. A medida que los productores legales de acero aumentaron su producción para compensar las disminuciones de los hornos de inducción cerrados, las cifras oficiales de producción de crudo aumentaron.
De hecho, un examen más detallado de los datos siderúrgicos chinos deja claro que el mercado del acero de China está en realidad más ajustado de lo que se puede inferir a partir de las cifras de producción de crudo (Gráfico 3). Las siguientes observaciones apuntan a un mercado tensionado:
Mientras la producción de acero crudo de China ha ido marcando nuevos récords, los datos de China Stat Info revelan una imagen contradictoria acerca de los productos de acero. La producción de productos de acero en el período de marzo a noviembre de 2017 fue un 3.46% inferior interanual, marcando la primera caída interanual para ese período desde 1995! Mientras que el acero crudo producido por hornos de inducción no se incluiría en las cifras oficiales de acero crudo, el metal acabaría utilizándose para fabricar productos de acero —alambres, varillas, rieles y barras— y están representados en estos datos. Por lo tanto, la caída en los productos de acero indica que la menor oferta de crudo ha lastrado la producción de productos siderúrgicos.
Las exportaciones de acero de China han estado en descenso. En teoría, esto puede deberse bien a un aumento de la demanda interna o a una disminución de la demanda externa. Dado el buen estado de la economía mundial y lo que sabemos sobre la producción de acero en China, creemos en la primera teoría. Las exportaciones de productos siderúrgicos de China bajaron un 30% interanual en los primeros 11 meses de 2017. Aparte de la caída interanual del 3.04% en 2016, estas marcan las primeras disminuciones anuales en las exportaciones desde 2009. Ante una menor oferta interna, China probablemente redujo sus exportaciones para satisfacer la demanda de los usuarios locales del acero.
Las importaciones de chatarra de acero de China cayeron en la 2S17. A diferencia de los altos hornos, que utilizan mineral de hierro como principal insumo en la fabricación de acero, los acereros ilegales cerrados usan chatarra que funden en un horno de inducción. Coincidiendo con la eliminación de estos hornos, las importaciones de chatarra de acero de China cayeron un 14.35% interanual en la 2S17. Esto es otra evidencia de la menor demanda de chatarra por parte de estos hornos.
Los inventarios de acero en China están cayendo. De hecho, los inventarios de productos siderúrgicos en las principales ciudades industriales están en mínimos históricos (Gráfico 4). Esto es un síntoma de un mercado ajustado con demanda superando la oferta, contradiciendo las cifras de producción de acero crudo de China.
Gráfico 2
Producción china récord de acero crudo##BR##En medio de la caída en la producción de productos siderúrgicos
Récord de producción de acero crudo en China en medio de la caída de la producción de productos siderúrgicos
Récord de producción de acero crudo en China en medio de la caída de la producción de productos siderúrgicos
Gráfico 3
Evidencia de los datos comerciales de China##BR##De un mercado ajustado
Datos comerciales de China: evidencia de un mercado ajustado
Datos comerciales de China: evidencia de un mercado ajustado
Gráfico 4
Los inventarios de acero##BR##En China están cayendo
Los inventarios de acero en China están cayendo.
Los inventarios de acero en China están cayendo.
Además, según la World Steel Association (WSA), la utilización de la capacidad en los 66 países para los que recopilan datos aumentó en 3.12 puntos porcentuales interanuales para el período de julio a noviembre de 2017 hasta promediar 72.64%, frente al promedio de 69.52% en el mismo período de 2016. Estas observaciones son evidencia de que, a pesar del aumento en las cifras oficiales de producción de acero crudo, la producción real ha caído y la oferta está más ajustada.
Que los precios del acero se mantengan impulsados por la escasez dependerá de si China tiene éxito en cerrar de forma permanente la capacidad excesiva y a los productores de acero de mala calidad, o si los operadores de hornos de inducción logran eludir estas políticas y traer acero ilegal de vuelta al mercado.
Las reformas de China dominarán el mercado del acero, al menos este invierno
Tras la conclusión de la Conferencia Central de Trabajo Económico de mediados de diciembre, las autoridades chinas anunciaron las "tres batallas difíciles" para los próximos tres años, que consideran cruciales para la prosperidad económica futura. Estas batallas se resumen en (1) prevenir riesgos mayores, (2) alivio de la pobreza dirigido, y (3) control de la contaminación. La Agencia Internacional de la Energía (IEA) estima que la contaminación del aire ha provocado ~1 millón de muertes prematuras mientras que la contaminación del aire en los hogares causó otras 1.2 millones de muertes prematuras en China anualmente.3 Por ello, mejorar la calidad del aire en China es un objetivo social y de salud primordial para el país.
Gráfico 5
La menor producción china de acero##BR##Impactará la producción mundial
La menor producción de acero en China afectará la producción mundial.
La menor producción de acero en China afectará la producción mundial.
Esto significará que las medidas para reducir la contaminación y despejar los cielos de China serán críticamente importantes para el sector siderúrgico. Según el Ministerio de Protección Ambiental, China se comprometió a una reducción interanual del 15% en la concentración de partículas en suspensión de menos de 2.5 micras de diámetro, conocidas como PM2.5, en 28 ciudades del norte propensas al smog. La industria del acero, que se concentra mayormente en la región norteña de China de Pekín-Tianjin-Hebei, es una de las principales fuentes de emisiones contaminantes en esa región. De hecho, las emisiones industriales —especialmente de los sectores del acero y del cemento— son supuestamente responsables del 40-50% de estas pequeñas partículas en suspensión.
El "plan de batalla" contra el smog invernal de China apuntará a estas industrias contaminantes ordenando recortes en la producción de acero, cemento y aluminio durante los meses propensos al smog, de mediados de noviembre a mediados de marzo, así como restringiendo el uso doméstico de carbón, los camiones diésel y los proyectos de construcción. Los recortes de producción de acero apuntan a un rango entre el 30-50%, lo que, según estimaciones de Platts, reducirá 33 mm MT de producción de acero —equivalente a ~3.9% de la producción de acero crudo prevista de China para 2017— durante el invierno. De hecho, según el ministro de medio ambiente de China, Li Ganjie, "estas campañas especiales no son puntuales, en cambio son una exploración de mecanismos a largo plazo."4 Por lo tanto, estos recortes podrían convertirse en un evento recurrente en el sector siderúrgico chino.
Las cifras oficiales de acero crudo de China comienzan a mostrar el impacto de estos recortes con la producción cruda de noviembre cayendo un 8.6% mes a mes (mom) y creciendo solo un 2.2% interanual —significativamente más lento que el promedio interanual del 7.6% experimentado desde julio. Como consecuencia, aunque la producción cruda en el resto del mundo creció en línea con los meses anteriores, la producción mundial de acero cayó casi un 6% mes a mes en noviembre, mientras que la producción interanual creció un 3.7% –una desaceleración significativa respecto al ritmo promedio interanual del 6.6% observado desde el comienzo de la 2S17 (Gráfico 5).
Los riesgos para esta perspectiva provienen del bajo cumplimiento de estos recortes. Hay informes recientes de evasiones por parte de productores de aluminio y acero en Shandong. No obstante, dado el enfoque de China en estas reformas, no prevemos violaciones generalizadas.
Otro riesgo proviene del lado de la demanda. Como parte de su agenda medioambiental, Pekín anunció planes para posponer la construcción de importantes proyectos públicos en la ciudad —proyectos viales y de agua— hasta la primavera. La suspensión no pretende afectar a los "proyectos de gran impacto en la vida de las personas" como ferrocarriles, aeropuertos y vivienda asequible.
La construcción es el mayor usuario final del acero —según la WSA más de la mitad del acero mundial se utiliza en edificios e infraestructura— una desaceleración en el sector de la construcción lastraría la demanda de acero.5 Si otras zonas de construcción importantes adoptan una política similar, el impacto de la menor oferta de acero se compensará con una demanda débil, atenuando el efecto general sobre el mercado del acero.
Conclusión: Esperamos ver una menor producción y exportaciones de acero de China en los próximos meses. Dada la determinación de Xi Jinping de mejorar la calidad del aire, esperamos que el cumplimiento de las reformas medioambientales entre los acereros sea fuerte este invierno. Esto, junto con la menor producción de los hornos de inducción en China, indica que el mercado podría estar más ajustado de lo que comúnmente se supone, al menos en la 1S18. La probabilidad de que la recuperación y expansión económica mundial persista durante 2018 sugiere que los mercados del acero podrían seguir bien demandados en la 2S18, particularmente si, como esperamos, el crecimiento fuera de China compensa la pérdida resultante de cualquier desaceleración en China. Sin embargo, tendremos que ver cómo serán las reformas reales para la industria tras la Asamblea Nacional Popular en marzo de 2018.6
Los márgenes de beneficio del acero impulsan la demanda de mineral de hierro
Dadas las excepcionales ganancias de precio del acero durante los últimos dos años, y el desempeño poco brillante del mineral de hierro en 2017, los márgenes de beneficio en los productores de acero chinos alcanzaron máximos de varios años (Gráfico 6). Normalmente, esto alentaría la producción de acero, lo que inundaría el mercado con oferta y presionaría los precios a la baja. Sin embargo, las reformas medioambientales de China limitarán la producción en la región siderúrgica más productiva del país en los próximos meses. En consecuencia, a menos que haya violaciones masivas de las políticas por parte de los productores de acero este invierno, no anticipamos un ajuste rápido de los precios a la baja.
En cambio, los productores de acero se están preparando para funcionar a plena capacidad cuando las restricciones de producción se levanten en la primavera. Por ello, están llenando inventarios de mineral de hierro y aprovechando los precios más bajos del mineral antes de que el mercado del mineral de hierro alcance al del acero. Las importaciones de mineral de hierro de China alcanzaron un récord histórico en septiembre, mientras que los últimos datos muestran un salto del 19% mes a mes (mom) en las importaciones, correspondiente a un aumento interanual del 2.8% (Gráfico 7).
Gráfico 6
Márgenes de beneficio saludables##BR##en el acero
Sólidos márgenes de beneficio del acero
Sólidos márgenes de beneficio del acero
Gráfico 7
Productores de acero acumulando mineral de hierro##BR##En preparación para la primavera
Productores de acero se abastecen de mineral de hierro en previsión de la primavera
Productores de acero se abastecen de mineral de hierro en previsión de la primavera
Esto va en contra de lo que esperaríamos durante un período de producción siderúrgica moderada. Especialmente en un entorno de inventarios saludables de mineral de hierro, como el que tiene actualmente China. Aunque los inventarios chinos bajaron desde los picos de mitad de año, reanudaron su tendencia al alza en el 4T17. Esto coincide con los recortes de capacidad del invierno siderúrgico y probablemente se deba a la menor demanda del mineral por parte de los molinos de acero. Hay dos teorías para explicar este fenómeno:
1. Los acereros chinos están aprovechando los precios más bajos del mineral de hierro y asegurando márgenes de beneficio más altos, anticipando precios más altos del mineral una vez que la producción de acero aumente de nuevo en la primavera.
2. En medio de los recortes invernales, los acereros chinos están demandando mineral de hierro de alta ley, importado de Brasil y Australia. Esto les ayudará a asegurarse de que pueden maximizar su producción sin violar las políticas medioambientales.
La conciencia medioambiental amplía los diferenciales del mineral de hierro
Una consecuencia de los recortes de capacidad del invierno siderúrgico es una mayor demanda de materias primas de mayor ley para reducir las fases más contaminantes de la producción de acero. El mineral de hierro de mayor ley, definido por su pureza o contenido de hierro, es más eficiente para los altos hornos, permitiéndoles producir más acero por cada tonelada de mineral de hierro que consumen, maximizando la producción y el beneficio. Esto es especialmente cierto en un mercado del acero ajustado, con márgenes de beneficio saludables: los acereros pueden permitirse las calidades superiores y están favoreciendo la eficiencia productiva.
El descuento por finos de mineral de hierro de menor ley —contenido de hierro del 58%— así como la prima por la mayor ley del 65% se han ampliado (Gráfico 8). Esto se debe a que los molinos han encontrado una manera de eludir legalmente las restricciones medioambientales invernales y seguir cumpliendo. Además, los minerales más puros son menos contaminantes, lo que ayuda a servir la agenda medioambiental de China.
Además, las primas por pellets de mineral de hierro y por guijarros de mineral de hierro también se han ampliado. A diferencia de los guijarros y pellets, que pueden alimentarse directamente a los altos hornos, los finos requieren un proceso de sinterización que es altamente contaminante. Por lo tanto, las reformas medioambientales de China han aumentado la demanda de minerales de mayor ley y menos contaminantes.
Un factor adicional que podría estar impulsando los diferenciales al alza son los mayores precios del coque metalúrgico (Gráfico 6). El mineral de hierro de mayor ley contiene menos sílice y, por tanto, requiere menos coque metalúrgico para purificar los minerales. Según evidencia anecdótica desde China, los finos de Carajás de Brasil —que tienen el mayor contenido de hierro y el menor contenido de sílice— están supuestamente en alta demanda.7
Además, las importaciones de China muestran una disminución del mineral de hierro procedente de India —que es de menor ley. En el período de julio a octubre, las importaciones cayeron un 11.26% interanual, con las importaciones de octubre cayendo casi un 25% interanual y un 30% mes a mes. Esto es consistente con la teoría de que los acereros están rechazando los minerales de menor ley. Por otro lado, se espera que las importaciones de Brasil y Australia se mantengan fuertes (Gráfico 9). El último Australian Resources and Energy Quarterly pronostica que las exportaciones australianas y brasileñas de mineral de hierro crecerán un 5.4% y un 4.2% respectivamente en 2018, mientras que se proyecta que las exportaciones indias caigan un 57.5% interanual.
Gráfico 8
Amplios diferenciales##BR##de precios del mineral de hierro
Amplios diferenciales de precio del mineral de hierro
Amplios diferenciales de precio del mineral de hierro
Gráfico 9
Las preocupaciones medioambientales apoyarán##BR##la demanda de mineral de hierro de alta ley
Las Preocupaciones Medioambientales Respaldarán la Demanda de Mineral de Hierro de Alto Grado
Las Preocupaciones Medioambientales Respaldarán la Demanda de Mineral de Hierro de Alto Grado
Conclusión: En un esfuerzo por mantener la producción alta y beneficiarse de los fuertes precios del acero frente a los recortes invernales de producción, los productores de acero están recurriendo a mineral de hierro de mayor ley, aumentando el diferencial entre minerales de alta y baja ley. El grado en que los productores de acero puedan mantener con éxito la producción gracias a los minerales de mayor ley amortiguará el impacto de los recortes de producción invernales en el sector siderúrgico. Dado que el enfoque medioambiental de China es un plan a largo plazo, esperamos que estos diferenciales permanezcan amplios, en lugar de volver a su promedio histórico.
Precios del acero y mercados del cobre
Gráfico 10
El consumo de acero ayuda a##BR##predecir los precios del cobre
El consumo de acero ayuda a predecir los precios del cobre
El consumo de acero ayuda a predecir los precios del cobre
El mercado del cobre vivió una montaña rusa en el cuarto trimestre. Los precios del metal rojo mantuvieron una tendencia general al alza desde mayo y alcanzaron un primer pico a principios de septiembre en $3.13/lb antes de tocar suelo en $2.91/lb a la segunda mitad de ese mes. Poco después, los precios del cobre alcanzaron un nuevo máximo de $3.22/lb a mediados de octubre —su nivel más alto en más de tres años. Los temores de una desaceleración en China tras los mensajes del XIX Congreso del Partido Comunista hicieron que el metal perdiera casi un 10% de su valor, cuando tocó fondo por segunda vez a principios de diciembre. De hecho, esto coincidió con una caída del 4.65% en el precio el 5 de diciembre. Aunque no hay una justificación clara para esta caída, puede atribuirse a una mezcla de factores que incluyen un aumento de ~10 th MT en los inventarios de la LME, preocupaciones sobre una desaceleración en China, así como una liquidación de posiciones antes del año nuevo. No obstante, el cobre ha recuperado estas pérdidas y cerró el año en $3.28/lb.
En nuestro modelado del cobre, encontramos que el consumo de acero es significativo para pronosticar el comportamiento futuro del precio del cobre. Más específicamente, el consumo de acero de China tiene una relación positiva significativa con los precios del cobre seis meses en el futuro (Gráfico 10). Esto se puede explicar por la importancia del sector de la construcción como usuario final de ambos materiales. Sin embargo, cada metal llega al sitio de construcción en marcos temporales diferentes. Mientras que los productos de acero se utilizan en la construcción de las estructuras y, por tanto, se necesitan al inicio del proyecto, el cobre se utiliza en el cableado eléctrico y la fontanería, y por tanto se necesita más tarde (aproximadamente 6 meses) en el proyecto.
Esto está en línea con nuestros hallazgos de que el acero es más significativo con un rezago de seis meses —reflejo del período medio entre la construcción de la estructura y la necesidad del cableado y la fontanería. El consumo de acero en China es un indicador adelantado útil de los mercados del cobre cuando los fundamentos del lado de la demanda dominan los mercados del acero y del cobre.
El estímulo gubernamental y un sólido sector de la construcción impulsaron la demanda de acero de China en 2017. Sin embargo, según la WSA Short Range Outlook, la demanda de acero se moderará este año debido a la reflación en China, parcialmente compensada por un fuerte crecimiento global. La WSA señala que el cierre de hornos de inducción infló las cifras de crecimiento de la demanda de acero hasta el 12.4% interanual, y en su lugar cita una estimación más razonable en torno al 3% interanual de crecimiento de la demanda de acero de China en 2017, llevando la tasa de crecimiento de la demanda mundial de acero al 2.8%. Mientras que la demanda de acero fuera de China creció un estimado del 2.6% en 2017, prevén que alcance el 3% en 2018. En contraste, esperan una demanda plana de China en 2018, llevando el crecimiento de la demanda mundial de acero al 1.6% en 2018 (Tabla 1).
Tabla 1
Demanda de acero (tasas de crecimiento interanual)
Las reformas ambientales de China impulsan el acero y el mineral de hierro
Las reformas ambientales de China impulsan el acero y el mineral de hierro
La moderación de la demanda desde China y la estabilidad (o falta de ella) del lado de la oferta dominarán el mercado del cobre este año. En el lado de la demanda, el mercado del acero de China ofrece perspectivas sobre la dirección futura del metal rojo.
Conclusión: Dado que el apetito de China por el acero se ha mantenido sano hasta la fecha y se proyecta que mantenga su nivel de 2017 este año, no esperamos una caída inducida por la demanda en los precios del cobre en el horizonte de 6 meses.
Roukaya Ibrahim, Editora asociada Commodity & Energy Strategy RoukayaI@bcaresearch.com
1 Véase "Will China's induction furnace steel whac-a-mole finally come to an end?" publicado por S&P Global Platts el 6 de marzo de 2017.
2 Véase el Commodity & Energy Strategy Weekly Report de BCA Research "Slow-Down In China's Reflation Will Temper Steel, Iron Ore In 2018," publicado el 7 de septiembre de 2017, disponible en ces.bcaresearch.com.
3 Véase el informe especial World Energy Outlook 2016 de la IEA titulado "Energy and Air Pollution," disponible en iea.org.
4 Véase "Provincial China officials used fake data to evade aluminium, steel capacity curbs - China Youth Daily," publicado el 26 de diciembre de 2017, disponible en reuters.com.
5 Véase "Steel Markets" en worldsteel.org.
6 Para discusión adicional, véase "Shifting Gears in China: The Impact On Base Metals," en la edición del 9 de noviembre de 2017 de Commodity & Energy Strategy de BCA Research. Está disponible en ces.bcaresearch.com.
7 Véase "High-medium grade iron ore fines spread widens to all-time high of $23.55/dmt," publicado el 22 de agosto de 2017, disponible en platts.com.
Visiones y temas de inversión
Recomendaciones
Recomendaciones estratégicas
Operaciones tácticas
Tabla de referencia de precios y estrategias de materias primas
Las reformas medioambientales de China impulsan el acero y el mineral de hierro
Las reformas medioambientales de China impulsan el acero y el mineral de hierro
Operaciones cerradas en 2017
Feature The Brazilian economy is finally improving following a devastating depression of about 3 years, where real GDP dropped by a whopping 7.4%. Does the current economic revival warrant a bullish stance on its financial markets? If the global risk-on trade persists among EM risk assets and commodities and there are no domestic political blunders in Brazil, the country's financial markets will continue to rally as economic growth improves. If the EM and commodities rallies wane and an EM risk-off cycle develops, Brazilian risk assets will sell off, regardless of domestic economic recovery. Provided economies around the world have become interconnected, it is often difficult to separate global economic and financial market impact from domestic economic dynamics. Yet, it is possible to do so in Brazil in the latest cycle. Chart I-1 demonstrates that the Brazilian real bottomed with iron ore prices on December 21, 2015 - not with the bottom in the Brazilian economy in early Q1 2017 (Chart I-1, bottom panel). In turn, the currency's rally amid the collapse in domestic demand has led to a material drop in inflation and allowed the central bank to cut interest rates aggressively. The exchange rate is the main variable driving financial markets in many developing countries, including Brazil. In these countries, it is the exchange rate that causes swings in interest rate expectations, not the other way around. Furthermore, other important variables that led to the bottom in iron ore prices and the BRL were the Chinese manufacturing PMI and money growth, both of which bottomed in the second half of 2015 (Chart I-2). Chart 1BRL Correlates With Commodities ##br##Not Domestic Demand Chart 2Chinese Data Led##br## The Bottom In BRL In short, economic recovery arrived much later in Brazil, and so far it has been exceptionally tame and tentative (Chart I-3). Brazil's domestic demand performance has in no way justified the rally in its financial markets since January 2016. If anything, it is the opposite: the domestic economic recovery emerged too late, and has been extremely subdued compared with the sizable gains in share prices. For example, banks' EPS bottomed only in May 2017, while their share prices troughed in January 2016 (Chart I-4). Similarly, Brazil's fiscal outlook and debt profile has continued to deteriorate, even though the country's sovereign spreads have tightened substantially (Chart I-5). Chart 3Brazil: Economic Recovery Is Exceptionally Tame Chart 4Brazil: Bank Share Prices And EPS Chart 5Brazil's Fiscal And Debt Profiles Have Deteriorated Hence, one can safely argue that economic growth and domestic fundamentals were not the basis behind why Brazilian financial markets found a bottom and rallied starting January 2016. Rather, the critical driving force has been commodities prices, China, the U.S. dollar and global risk appetite. This is consistent with the defining features of bull and bear markets: In a bull market, liquidity lifts all boats, and all flaws are overlooked or discharged while minor positives are magnified by the market. In a bear market, even marginal negatives are overblown, and the market punishes severely for minor missteps. In short, global risk assets have been in a genuine bull market since early 2016, and that has overridden Brazil's poor domestic fundamentals. Going forward, we recommend avoiding Brazilian risk assets - not because we do not expect an economic recovery in Brazil to progress, but because our view on China's impact on commodities and the potential U.S. dollar rebound will curb overall risk appetite toward EM. We discussed this EM/China/commodities outlook at length in last week's report.1 Timing a shift in financial market regimes is always a difficult task, but our sense is that a top in EM risk assets will likely occur between now and the end of October, as China's Communist party Congress reiterates its focus on containing financial risk and leverage, as well as the authorities' marginal tolerance for slightly slower growth. Furthermore, our broad money (M3) impulse for China suggests an imminent relapse in Goldman Sach's current economic activity indicator for the mainland economy (Chart I-6). Our assumption is that commodities prices will drop due to potential weakness in China, and that the U.S. dollar and U.S. bond yields are oversold and will recover, respectively. Altogether, these views warrant a cautious stance on EM currencies. The real has historically been correlated with commodities prices, and this positive correlation will likely continue. As and when the Brazilian currency resumes its depreciation, the risk-on trade in Brazilian equities and credit markets will end. As for Brazilian financial markets, a few relationships are worth highlighting: Since early this year, iron ore prices have been inversely correlated with Chinese money market rates (Chart I-7). A possible explanation is that iron ore and other commodities prices trading on Chinese exchanges have been driven by meaningful speculative buying that negatively correlates with borrowing costs on the mainland. Chart 6China's Growth Is Set To Slow Chart 7Iron Ore Prices Are Vulnerable Given the latest relapse in Brazil's nominal GDP growth, the pace of amelioration in private banks' NPL and NPL provisions could stall (Chart I-8). In turn, Brazilian banks' share prices seem to move inversely with the rate of change in private banks' NPL and NPL provisions (Chart I-9A & Chart I-9B). If these relationships hold, we might be close to a peak in Brazilian bank share prices. Chart 8Brazil: Is The Improvement In NPL Cycle Over? Chart 9ABrazil: NPL Cycles and Bank Stocks Chart 9BBrazil: Provisions Cycles And Bank Stocks Finally, the pace of economic recovery will likely disappoint because the Brazilian economy is facing numerous headwinds: High borrowing costs - the real prime lending rate is 12.5% and the policy rate in the real terms is 6.8%, while public banks' lending rates are set to rise due to the TJLP reform that will remove the government budget's subsidy for borrowers. With 50% of outstanding credit being earmarked credit (previously subsidized by the government and provided by public banks), the impact on economic activity will be non-trivial; Lower government spending, as 2018 government expenditure growth cannot exceed the 2017 June headline inflation rate of 3%. Besides, the fiscal balance is so disastrous that risks to taxes are to the upside, not downside. Furthermore, the recently augmented 2017 year-end fiscal primary deficit target of BRL 159 billion is smaller than the deficit of BRL 182 billion for the past 12 months. This entails government spending cuts are likely this year, which will weigh on growth. The Brazilian exchange rate is not cheap. The nation needs a cheaper currency to reflate its economy. Lingering political uncertainty amid the corruption scandals and upcoming presidential elections in fall 2018 will continue to weigh on capital spending and employment, which have not yet recovered. Bottom Line: Our overarching negative view on EM, China and commodities heralds staying cautious on Brazil's financial markets despite the early signs of domestic economic recovery. Arthur Budaghyan, Senior Vice President Emerging Markets Strategy arthurb@bcaresearch.com Andrija Vesic, Research Assistant andrijav@bcaresearch.com 1 Please refer to the Emerging Markets Strategy Weekly Report, titled "Copper Versus Money/Credit In China - Which One Is Right?", dated September 6,. Equity Recommendations Fixed-Income, Credit And Currency Recommendations
Highlights Beijing's continued focus on reducing excess industrial capacity in the lead-up to the 19th National Congress of the Communist Party will keep iron ore and steel markets buoyant for the balance of the year. The trajectory of prices further out the curve will, however, depend greatly on how quickly China's reflationary policies wane next year. Energy: Overweight. U.S. gasoline inventories could fall by 7-10mm barrels in the first week following the storm (data to be reported today by the EIA), and another 5-10mm barrels (or more) over the next month, depending on how long it takes to restart all of the refineries knocked offline by Hurricane Harvey, according to estimates in BCA Research's Energy Sector Strategy. Current gasoline inventories sit about 20 million barrels above the 2011-2015 average, which, based on our calculations, could be completely evaporated within a month, materially changing the U.S. gasoline market and related crack spreads.1 Base Metals: Neutral. Following our analysis last month, we are recommending a tactical short Dec/17 COMEX copper position at tonight's close, expecting the market to correct in line with the fundamentals we highlighted.2 Precious Metals: Neutral. We remain long gold as a strategic portfolio hedge. The metal will be supported by low real interest rates and safe-haven demand. The position was recommended May 4, 2017, and is up 8.7%. Ags/Softs: Underweight. Another bumper crop is being priced into corn this year. Expectations for higher corn yields this year - ranging from 166.9 bushels/acre (bpa) to 169.2 bpa vs. 169.5 bpa expected by the USDA - will keep prices under pressure. We remain bearish.3 Feature In reaction to Chinese economic and environmental policies, iron ore and steel each rallied by ~78% in 2016. While steel continued its ascent in 2017 - gaining a further ~20% in the year-to-date (ytd), iron ore broke away from this trend and plummeted by more than 40% between mid-February and mid-June (Chart of the Week). Chart of the WeekSteel And Iron Ore Diverged Earlier This Year Although iron ore has since reversed its path and regained most of the loss, the divergence between steel and the ore from which it is produced comes down to a difference in fundamentals. Increased supplies of iron ore at a time of healthy inventories were bearish in H1. On the other hand, closures of both steel capacity as well as coal capacity kept the steel market tight. While China's supply-side policies have been the force behind the strength in both to date, Chinese demand - which accounts for ~50% of global iron ore and steel consumption, and steel production - will take center stage next year. The speed at which China's reflationary policies wane will determine the long-term trajectory of steel and iron ore markets. Granted while there are some early signs of a potential slowdown in China's economy, we do not expect this to hit metals generally in the near term. As Beijing continues its focus on reducing excess capacity in the steel sector, and as policymakers prepare for the 19th National Congress later this year, we expect steel and iron ore to remain buoyant in H2. China's Steel Production Paradox Eliminating Excess Steel Capacity At The Forefront Of Reform Agenda... The National Development and Reform Commission (NDRC) - China's top economic planning authority - has made clear that reducing overcapacity is at the forefront of its reform priorities. More concretely, Beijing aims to cut steel capacity by up to 100-150mm MT over the five-year period between 2016 and 2020. It has already made progress towards that end - shuttering a reported 65mm MT last year - and is on track to meet its targeted 50mm MT of steel capacity cuts by the end of 2017. Additionally, in January the central government announced its intention to eliminate all steel capacity from intermediate frequency furnaces (IFF) by the end of June 2017. So it is no surprise that steel has been performing so well. However, this narrative is inconsistent with Chinese data. ...Yet Chinese Production Is At All-Time Highs Steel production from China this year has been soaring, growing by more than 5% year-on-year (yoy) in the first seven months of 2017. In fact, latest production data from July came in at 74mm MT, marking a more than 10% yoy increase, and an all-time record high for monthly production (Chart 2). And since ~50% of global steel is produced in China, this has translated into strong global steel production figures in 2017. Production grew by 4.75% yoy in the first seven months of 2017, the most since 2011 and almost five times as much as the five-year average yoy increase for that period. In fact, the China Iron and Steel Association recently announced that the strength in steel prices does not reflect underlying fundamentals and is instead due to speculation and a misunderstanding of the market impact of China's policies. In an effort to deter speculation, China's commodity exchanges implemented several restrictions in August, including increasing margins on futures contracts and limiting positions (Chart 3).4 Chart 2Record Steel Production##BR##Amid Chinese Capacity Cuts Chart 3Pure Speculation Or Not?##BR##Beijing Cracking Down On Market Speculation It Comes Down To The Nature Of IFFs This paradox of record high production at a time of capacity closures comes down to the nature of IFF capacity that was shutdown. While for the most part, old, outdated and unproductive facilities were targeted for closure last year, the shift in focus towards IFFs had a different effect on the market in 2017. IFFs use scrap steel, rather than iron ore, as a raw material, which is melted through an induction furnace to produce low-quality steel. Because this steel fails to meet government specifications for high-quality steel, it is considered "illegal" and, although it is used to satisfy steel demand, it is not included in official production data. Thus, efforts to shut-down these producers are not evident in China's production figures. However, IFF steelmaking capacity is estimated to be 80-120mm MT a year, and accounts for ~10% of steel production capacity in China. In terms of output, this substandard steel accounts for almost 4% of Chinese production. Thus, traditional steelmaking facilities have been required to fill the supply void caused by IFF closures, raising the official production figures. Steel Exports Take A U-Turn As "Illegal" Capacity Is Shuttered Moreover, Chinese exports have reversed their trend and are on the decline. Steel exports registered a ~30% yoy fall in the first seven months of this year (Chart 4). This is further evidence that the capacity closures have had a real impact on actual steel production, and that domestic consumers have turned to steel that is typically exported, in order to fulfill their demand for the metal. Furthermore, as authorities crack down on IFFs, demand for scrap steel - the main raw material in IFFs - has declined. Amid waning demand, scrap steel prices fell by 9% in H1 before regaining almost 6% in July. This follows a ~70% rally last year (Chart 5). Chart 4Exports Are Down As##BR##Capacity Is Shutdown Chart 5Scrap Steel Rally Takes A Break##BR##As Demand From IFFs Eliminated Coking Coal Cost Push As part of its environmental protection plans, China's policymakers announced plans to replace 800mm MT of outdated coal mining capacity with 500mm MT of "advanced" capacity by 2020. Last year, coal-mining capacity closures exceeded the 250mm MT target, reversing the slump in coal prices and leading an almost 225% rally in coke futures. Coking coal, or metallurgical coal, is a key ingredient in the steelmaking process. Although coke dipped since its December high, it has rallied by 34% in the past two months. Thus, Chinese steel mills are now producing in an environment of higher input costs, which will translate to higher prices for the finished good. China's Capacity Closures Likely Peaked Given that China has set June 30, 2017 as the target for eliminating induction furnace-based steelmaking, we do not expect IFF shutdowns to continue impacting the steel market. Additionally, while excess steel capacity is conventionally estimated to be 325-350mm MT in China, the Peterson Institute for International Economics (PIIE) argues that this estimate does not account for the need for a certain amount of excess capacity. Instead, they cite 130mm MT as a more reasonable figure of Chinese excess steel capacity. According to PIIE estimates, this means that by the end of the year, China will have eliminated almost all of its excess capacity, and will be very close to the quantity of capacity closures it aims to achieve by 2020. Consequently, we do not expect shutdowns to continue driving up steel prices. However, plans to halve blast-furnace production at Northern China mills to reduce pollution during the winter will weigh on near term Chinese production and the steel market. Bottom Line: Chinese authorities are closing in on their targeted capacity shutdowns. We do not expect this reduction in capacity to continue impacting steel markets in the long term. Near-term supply dynamics will be driven by efforts to reduce winter pollution. IFF Closures Spur Demand For Iron Ore Chart 6Mid-Year China Inventories At Record High With the elimination of IFFs, which take in scrap steel as the main input, we expect greater demand for iron ore from traditional steel mills as they work toward filling the supply gap left by the loss of the so-called illegal steel. While steel prices have been on a consistent uptrend since 2016, iron ore - which usually moves in tandem with steel - diverged from its main demand market earlier this year, before resuming its rally in Q2. The deviation earlier this year was due to increased supplies from Australia and Brazil amid record levels of Chinese inventories (Chart 6). This has reversed, and iron ore has resumed its climb. Stronger demand for iron ore is consistent with import data, which shows that China has been hungry for Australian and Brazilian iron ore. However, since the average iron ore production cost in China - estimated at more than 60 USD/MT, or roughly three (3) times the cost of iron-ore production in Brazil and Australia - is greater than in other regions, many Chinese mines go offline during periods of low prices. By the same token, elevated prices tempt high-cost Chinese producers back online, increasing global supply. Bottom Line: Since the closure of induction furnaces has shored up demand for iron ore, pulling prices up with it, we do not anticipate further drops in prices. However, if prices remain elevated, increased production from China amid well stocked global markets will keep a tight lid on iron ore prices. Chinese Appetite Will Determine Long-Run Market Performance While steel and iron ore are currently well supported, their near term strength is in large part due to China's reflation policies which have revived demand. Given that it is a sensitive political year, we do not foresee downturns in the Chinese economy this year. Authorities will want to go into the 19th National Congress of the Communist Party in mid-October with solid economic data as a backdrop. However, waning Chinese growth would be a long-run negative for the markets (Chart 7). Specifically, official government data indicate: 1. There are early warning signs that the property market in China may be losing momentum. New floor space started, and new floor space completed contracted in July, while growth in floor space under construction and floor space sold have been easing. Furthermore, while total real estate investment has been growing at an average monthly rate of almost 9% yoy since the beginning of the year, July figures show a marked slowdown, at less than 5% yoy growth. We would not be surprised to see the property market winding down as China begins to tighten its real estate policies. 2. Chinese automobile production has slowed significantly from all-time highs recorded at the end of last year. The monthly average 4% yoy growth in the five months to July is a significant deceleration from the 10% yoy average witnessed during the same period last year. 3. However, infrastructure investment has been strong, recording its all-time high in June, and a 20% yoy increase in July. With the National Congress scheduled in October, we do not expect a slowdown in infrastructure spending this year. In addition, August manufacturing PMI data in China came in above expectations, and registered a slight increase from the previous month (Chart 8). The index has remained relatively stable since the beginning of the year, after gaining strength last year. Chart 7Despite Signs Of Fizzling,##BR##Slowdown Not Expected In 2017 Chart 8Accomodative Policies Will##BR##Keep Near Term Demand Solid Bottom Line: Although we expect China's appetite for steel will begin to wane as the economy unravels from its reflationary policies, steel demand will remain strong in 2017. Chinese authorities will want to ensure solid growth in the run-up to the National Congress scheduled for mid-October. Thus, the near-term focus will remain on supply, and the impact of its reforms on ferrous metals. Post-Harvey Rebuilding Will Spur Steel Demand Hurricane Harvey is expected to impact steel markets in three main ways: 30-35% of all U.S. steel imports come through Port Houston. However, the port resumed operations as of September 1 and there is no longer a threat posed on steel imports. The disruption in freight service resulting from Harvey is expected to temporarily push up trucking rates in the next few weeks. This will give U.S. steel firms, which have long been suffering from cheaper Chinese imports, an advantage and opportunity to fill the demand void which will be bullish for U.S. steel. Harvey will have a longer-run positive impact on steel markets through the demand that will be generated from the infrastructure rebuilding process. Still, increased demand for steel will be partially mitigated by a rise in scrap steel supply, in the aftermath of destruction. While it is still too early to measure the extent of damage and the impact of the rebuilding process on steel markets, estimates from the storm's damage run as high as USD 120 billion. Texas's governor estimated the damage to be much greater - between USD 150-180 billion. This compares to USD 110 billion from Hurricane Katrina, the most devastating storm to hit the U.S. prior to Harvey. Bottom Line: While it is still too early to determine the full extent of destruction, the infrastructure rebuilding phase will spur demand for steel. Roukaya Ibrahim, Associate Editor Commodity & Energy Strategy RoukayaI@bcaresearch.com 1 Please see BCA Research's Energy Sector Strategy Weekly Report "Upgrading Refining Sector As Harvey Clears Out Inventories," published September 6, 2017 It is available at nrg.bcaresearch.com. 2 Please see BCA Research's Commodity & Energy Strategy Weekly Report "Copper's Getting Out Ahead Of Fundamentals, Correction Likely," published August 24, 2017. It is available at ces.bcaresearch.com. 3 Please see "GRAINS - Corn lower as U.S. yield forecasts rise; soy, wheat climb," published by reuters.com on September 1, 2017. 4 Please see "Shanghai exchange urges steel investors to act rationally, hikes fees" published by reuters.com on August 11, 2017. Investment Views and Themes Recommendations Strategic Recommendations Tactical Trades Commodity Prices and Plays Reference Table Trades Closed in 2017 Summary of Trades Closed in 2016
Highlights China's supply-side structural reforms will focus mainly on its coal and steel markets this year. In addition, environmental policies will become stricter in 2017, as Beijing puts more weight on environmental protection than economic development. As as result, supply growth will slow, particularly in steel markets, which will be good news for global steel producers and bad news for iron ore exporters in Australia and Brazil. While we are more bearish on iron ore than steel due to supply-side reforms and stricter environmental policies, we remain cautious getting short iron ore, given the Dalian Commodity Exchange's iron-ore futures are backwardated (prompt prices exceed deferred prices). This indicates buyers are willing to pay more for prompt delivery (e.g., next week) than they are for deferred delivery (e.g., next year). Energy: Overweight. The Saudi-Russia production deal will slow the rate of growth in supply relative to demand, which will tighten physical markets. This will cause inventories to draw, and the backwardation in crude to deepen. Our long Dec/17 vs. short Dec/18 WTI recommendation is up 700%. We are long at +$0.04/bbl, and will risk the spread going to -$0.05/bbl. We will take profits at $0.50/bbl. Base Metals: Neutral. Supply-side reforms, coupled with environmental restrictions will slow the growth of steel production in China this year, benefiting producers ex-China. Precious Metals: Neutral. Gold markets will become increasing volatile, with the Fed likely to keep any rate-hike decision on hold until it has greater clarity re the incoming Trump administration's fiscal policy intentions. Ags/Softs: Underweight. The USDA's most recent supply-demand balances continue to paint a bearish picture for grains, with global ending stocks expected to grow. Feature China will continue its supply-side structural reforms this year, focusing mainly on its coal and steel markets. China environmental policies will become stricter in 2017. This year will mark the first time the central government puts more weight on environmental protection over economic development in evaluating officials' performance since 1949, when the People's Republic of China was established. Supply growth will be slower than last year due to continuing reforms, and stricter environmental policies in the country. Among base metals and bulks, the steel and iron ore markets will be most affected. This will be good news for global steel producers and bad news for global iron ore producers. We are more bearish on iron ore than steel strategically, due to these supply-side reforms, stricter environmental policies, scrap steel substitution, and rising global iron ore supply. That said, we remain cautious getting short iron ore, given the Dalian Commodity Exchange's iron-ore futures are backwardated (prompt prices exceed deferred prices). This indicates buyers are willing to pay more for prompt delivery (e.g., next week) than they are for deferred delivery (e.g., next year). We are downgrading nickel from bullish to neutral, both tactically and strategically. We also are downgrading our tactically bullish stance on aluminum to neutral, as the Indonesian government on January 12 unexpectedly allowed exports of nickel ore and bauxite under certain conditions. China's Supply-Side Reforms In 2017 In 2016, steel prices rallied more than 90% from year-end 2015 levels, but Chinese crude steel and steel products production rose a mere 0.4% and 1.3% yoy, respectively. Back in 2009, when steel prices rose about 30% from November 2008 to August 2009, production grew 12.9% and 17.8% yoy for Chinese crude steel and the output of steel products, respectively (Chart 1). Chart 1China: A Slower Steel Production##br## Recovery Than In 2009 One reason for these disparate performances can be found in the massive production cuts made in China last year to crude steel capacity. In February 2016, China's central government announced that it planned to cut 100 to 150 million metric tons (mmt) of crude steel capacity over the five-year period of 2016-2020. While the country aimed to cut 45 mmt in 2016, the actual reduction accelerated in 2016H2 making the full year decrease much larger. According to the China Iron and Steel Association (CISA), 70 mmt of crude steel capacity was taken off line last year, equivalent to 6.2% of total crude steel production capacity in China. This explains, in part, the much slower crude steel production recovery last year when compared to the post-Global Financial Crisis (GFC) recovery in 2009. How much crude steel production capacity will China cut in 2017? Even though last year's 70 mmt capacity cut means about half of the five-year 100-150 mmt capacity-cut target was already achieved, the Chinese government does not show any sign of moderating its desire to see additional cuts. The Chinese Central Economic Work Conference (December 14-16, 2016) emphasized that 2017 will be a year to deepen supply-side structural reforms. Although the central government still has not finalized its 2017 target, we believe a further 40-50 mmt cut in 2017 is possible. For example, China's largest steel producing province - Hebei - has already announced its 2017 crude steel capacity reduction target, which will be 14.39 mmt, similar to its 2016 target of 14.22 mmt. We would note here that the actual cut for the Hebei province in 2016 was 16.24 mmt, much higher than the target, indicating officials will seek to err on the high side when it comes to taking production off line. In December 2016, the country launched a nationwide crackdown on production of so-called shoddy steel, also known as ditiaogang in Chinese - low-quality crude steel made from scrap metal, which is commonly used to produce substandard construction steel products. This material accounts for about 4% of Chinese crude steel output. Last week, the Chinese government ordered a full ban on "shoddy steel" production to be completed before June 30, 2017. This month, 12 inspection groups were sent to major shoddy steel producing provinces to oversee the implementation of the directive. In 2017, the Chinese government also plans to: rein in new steel production capacity; scrutinize new projects; push for more mergers; and generally tighten supervision in the steel sector. In early January, China's top economic planner - the National Development and Reform Commission (NDRC) - toughened its tiered electricity pricing to limit availabilities to outdated steel producers, and to advance its goal of capacity cuts. According to the NRDC website, the new measures raised the price paid by "outdated" steelmakers by 66.7% to 0.5 yuan per kWh, effective on Jan. 1, 2017. Outdated steelmakers, in the government's reckoning, are those scheduled to be phased out - for example, those shoddy steel producers - most of which are privately owned small- or medium- scale mills. Bottom Line: A further capacity cut will limit Chinese steel production growth in 2017. China's Environmental Policies In 2017 In 2016, the Chinese government increased the frequency at which it sent environmental inspection teams to major metal-producing provinces and cities, to ensure the smelters and refiners comply with state environmental rules. Factories that failed to meet environmental standards were ordered to permanently or temporarily shut down, depending on the severity of their violations. This year, with persistent and intensifying smog becoming a greater threat to the health of China's population, environmental policies will only get stricter, resulting in more frequent supply disruptions, especially in its steel industry. In addition to plant-specific environmental measures, in late 2016, China rolled out rules to evaluate the "green" efforts of local governments. For the first time since 1949, when the People's Republic of China was established, the central government indicated it would put more weight on environmental protection than on economic development, as measured by GDP, in evaluating local government officials' performance. This likely will reduce the local governments' incentive to support unqualified or unprofitable steel/aluminum production. Bottom Line: China's stricter environmental policies will cause more supply disruptions and increase production costs for the Chinese metal sector, especially the steel industry. Our Views On Iron Ore And Steel In 2017 We are strategically neutral on steel prices and bearish on iron ore prices. Supply-side reforms and stricter environmental policies in China likely will result in zero growth or even a small contraction in Chinese steel production, which may well support steel prices while reducing iron ore demand. This will be good news for global steel producers ex-China, and bad news for global iron ore producers. China is determined to cull all "shoddy steel" production by the end of June, which will make considerable volumes of scrap steel available to be used in good-quality steel production. Chinese steel producers are currently willing to replace iron ore with scrap steel in their steel production, given scrap steel prices are cheap versus iron ore and steel product prices (Chart 2). In addition, using scrap as an input to produce crude steel will save steel producers money on coking coal, the price of which has surged over the past year. Chinese steel demand growth may remain robust in 2017H1. Last year's stimulus still has not run out of steam, and this year's fiscal and monetary policy will stay accommodative.1 Raw-material costs in the form of iron ore, coking coal and oil soared versus levels seen last year, which means the production costs of steel now are much higher than last year. This will support steel prices (Chart 3). Chart 2More Scrap Steel Will Replace##br## Iron Ore In Steel Production Chart 3Cost Push Will Support ##br##Steel Prices Steel product inventories at the major cities in China are still low; producers' inventory holdings have declined to levels last seen in 2014, which also will be supportive of steel prices (Chart 4). China's iron ore inventories are high, while domestic iron ore production is recovering (Chart 5, panels 1 and 2). With slowing domestic steel production, Chinese iron ore import growth likely will be subdued this year (Chart 5, panel 3). Global iron ore supplies are increasing. The "Big Three" producers - Vale, Rio Tinto, and BHP - all plan to boost production in response to profitable iron ore prices this year. Indeed, this month, Vale started its first iron-ore shipments from the giant new S11D mine. Chart 4Low Inventory Supports Steel Prices As Well Chart 5Limited Chinese Iron Ore Import Growth In 2017 Bottom Line: The outlook for steel prices this year is brighter relative to iron ore in 2017, although, the backwardation in the Dalian Commodity Exchange's iron-ore futures suggests markets may be pricing in tighter iron-ore supply in the near term. We will explore this in future research. Downgrading Our Nickel And Aluminum Views We are downgrading nickel from bullish to neutral, both tactically and strategically. Chart 6Downgrading Nickel And Aluminum View In November, we expected the global nickel supply deficit to widen on rising stainless steel demand and falling nickel ore supply. One major reason we were bullish nickel was that there was no sign Indonesia's export ban - imposed in January 2014 - would be removed. With elevated global nickel output, surging Chinese nickel pig iron (NPI) imports, and rebounding Indonesian nickel ore exports, Chinese NPI production will recover in 2017, which will reduce the country's need for refined nickel imports (Chart 6). Our long Dec/17 LME nickel contract versus Dec/17 LME zinc contract was stopped out for a 5.1% loss this week. We are no longer bullish nickel versus zinc. We also are downgrading our tactically bullish stance on aluminum to neutral, after the Indonesian government unexpectedly allowed exports of nickel ore and bauxite under certain conditions earlier this month. We are removing our buy limit order to go long Mar/17 aluminum contracts if it falls to $1,640/MT from our shopping list. Ellen JingYuan He, Editor/Strategist ellenj@bcaresearch.com 1 Please see Commodity & Energy Strategy Weekly Report "China Commodity Focus: How China's Monetary And Fiscal Policy Will Affect Metal Markets," dated January 12, 2017, available at ces.bcaresearch.com Grains/Softs Global Grain Stocks Set To Rise Overall: Despite some positive developments in the U.S. - where corn supplies are falling faster than demand - we remain underweight grains. This is largely because of the continued growth of production relative to consumption globally, which looks like it will lift global stocks by the end of the 2016-17 crop year in September. While we do expect a slight decrease in output this year, it is difficult to upgrade our view at this point (Table 1). Table 1World Grains Estimates - January 2017 Wheat: Worldwide, output growth in Argentina, Russia and the EU added 1.3mm tons of production to global supplies. In the U.S., ending stocks are projected to reach levels not seen since the late 1980s, according to the USDA. Global consumption, meanwhile, is projected to increase a mere 100k tons, according to the USDA, which will lift ending stocks 1.2mm tons by the end of the crop year to a record 253.3mm tons. Corn: U.S. production is expected to fall, which, along with higher usage in the ethanol market, will contribute to lower stocks. However, on a global basis, production is set to outstrip consumption resulting in higher ending stocks at the end of the crop year. Soybeans: Same story here: Production growth outstripping consumption, leaving ending stocks higher by close to 7% yoy, based on the USDA's estimates. Rice: In relative terms, the rice market has the most bullish fundamentals - global production and consumption are roughly balanced, leaving expected ending stocks slightly above last year's level. We continue to favor rice over the other grains (save wheat) for this reason. Investment Views and Themes Recommendations Strategic Recommendations Tactical Trades Commodity Prices and Plays Reference Table Trades Closed In 2017
Highlights Dear Client, This issue of BCA's Commodity & Energy Strategy features our 2017 Outlook for Bulks and Base Metals. The evolution of China's economy will, as always, be critical to these markets, given that country's outsized role in iron ore, steel and base metals. We are broadly neutral the complex, and, with the exception of the nickel market, see supply and demand relatively balanced. That said, the potential for price spikes - e.g., copper, where spare capacity is shrinking - and for monetary and fiscal policy errors to spill into these markets keeps downside price risk elevated. Next week, we will publish our 2017 Outlook for Energy Markets, with special attention to the oil market. As expected, OPEC and Russia agreed to cut production. As we went to press, WTI and Brent crude oil prices were up ~ 8.5% on the news. We will take profits today on our Long February 2017 Brent $50/bbl Calls vs. Short February 2017 $55/bbl Calls, which was up 73.6% basis Wednesday's close when we went to press. We remain long August 2017 WTI vs. Short November 2017 WTI futures in anticipation of a backwardated forward curve in 2017H2; as of Wednesday's close, this position returned 76.39% since November 3, when we recommended the exposure. Our 2017 Precious Metals and Agricultural outlooks will be published in the following weeks. We will finish with an outlook for commodities as an asset class in 2017 at year-end. We trust you will find these reports informative and useful for your investing and year-ahead planning. Kindest regards, Robert P. Ryan, Senior Vice President The monetary and fiscal stimulus that massively boosted China's housing market this year will wind down, bringing an end to the run-up in iron ore, steel and base metals prices. While we expect "reflationary" policies to continue going into the Communist Party Congress next fall, when new leadership roles will be announced, we do not expect anything along the lines of the surge in policy stimulus seen earlier this year: Unwinding and controlling property-market excesses and high debt levels will limit policymakers' desire to turbo-charge the housing market again, limiting the boost such policies provide. We are downgrading our tactically bullish view on iron ore to neutral. Our out-of-consensus bullish call was proven correct with a 43% rally in iron ore prices within the past eight weeks.1 Strategically, we retain a bearish bias, as rising iron ore supply may overwhelm the market again in 2017H2. We remain tactically neutral and strategically bearish steel. Low steel inventories and production disruptions caused by China's recently launched environmental inspection program likely will continue to support steel prices in the near term. However, persistently high steel output and falling demand from the Chinese property sector should eventually knock down prices in 2017H2. We remain neutral copper going into 2017, expecting Chinese reflationary stimulus to continue along with a concerted effort to slow the housing boom in that country. This will still support real demand for copper, but will reduce demand from new construction. Manufacturing will play a larger role on the demand side next year, while a stronger USD could limit price appreciation. We still believe nickel will outperform zinc over a one-year time horizon. We are bullish nickel prices, both tactically and strategically, as we expect a supply deficit to widen on rising stainless steel demand and falling nickel ore supply in 2017. For zinc, we remain tactically neutral and strategically bearish. We expect zinc supply to rise considerably in response to current high prices. For the global aluminum market, we remain tactically bullish and strategically neutral. Supply shortages will likely persist ex-China over the next three to six months. We have three investment strategies, including long iron ore/short steel futures, long nickel/short zinc futures, and buying aluminum on weaknesses. Feature Iron Ore & Steel: Limited Upside In 2017 A Quick Recap Back in early October, we wrote an in-depth report on global iron ore and steel markets in which we made an out-of-consensus tactically bullish call on iron ore, expecting the price to reach the April high of $68.70/MT in 2016Q4. Our prediction was realized, with iron ore prices surging 43% to a two-year high of $79.81/MT on November 11 (Chart 1, panel 1). Although the steel market has been much stronger than the assessment driving our tactically neutral stance indicated earlier in the quarter, our call that iron ore would outperform steel in the near term was correct: Steel prices rose 21% during the same period of time - only half of the iron ore price rally (Chart 1, panel 1). Over the past two months, the rally occurred in both futures and spot markets, and in the markets globally (Chart 1, panels 2 and 3). Chart 1Iron Ore: Downgrade To Tactically Neutral Chart 2Steel: Remain Tactically Neutral The 2017 Outlook First, we downgrade our tactically bullish view on iron ore to neutral, as China likely will import less iron ore in 2017Q1 (Chart 2, panel 1). China has imposed stricter environmental regulations on its domestic metals industry since 2014 to control pollution. The government currently is sending environmental inspection teams to major steel-producing provinces to check how well the steel producers are complying with state environment rules. Many steel-producing factories were closed this year, due to environmental violations. This will constrain growth in Chinese steel output in the near term (Chart 2, panel 2). Between 2011 - 15, the state-owned Xinhua news agency states Chinese steel capacity has been reduced by 90 million MT; authorities want to cut as much as 150 million MT by 2020, including 45 million MT this year.2 Chinese steel production generally falls in January and February as workers are celebrating the Chinese Spring Festival - the most important festival for the Chinese. Iron ore inventories at major Chinese ports are still high (Chart 2, panel 3). Given iron ore prices have already rallied more than 100% since last December and steel demand outlook remains uncertain next year, most steel producers likely will choose to push off purchases into 2017Q2 or later. While China may slow its iron ore purchases next year, global iron ore supply is set to increase in 2017 as many projects will come on stream. The world's biggest iron ore project, Vale's S11D, which has a capacity of 90 million metric tons (mmt) per year, is expected to ship its first ore in January 2017. Moreover, with iron ore prices above $70/MT, global top iron ore companies with low production costs can be expected to sell as much as they can to maximize their profit, given their all-in production costs for high-quality iron ore (62% Fe) typically are between $30 and $35/MT.3 That said, we are not bearish on iron ore prices in the near term. We prefer to be neutral. Iron ore prices will have pullbacks, but the downside may be also limited in 2017H1. Chinese domestic iron ore production is still in a deep contraction (Chart 2, panel 4). Plus, most steel producing companies prefer high-quality ore from overseas over the domestic low-quality ore. In addition, almost all steel companies in China are profitable at present, which means Chinese steel production will rise after the Spring Festival holidays. All of these factors will support iron ore prices. Chart 3Iron Ore & Steel: Strategically Bearish Second, we retain our tactically neutral view on steel. Chinese steel demand was lifted by China's expansionary monetary and fiscal policies this year - which we have dubbed China's "reflationary" policy - which included reductions in its central bank's policy rate and reserve requirement ratio, and implementation of additional infrastructure projects (Chart 3). This was the driving force for the sharp steel price rally this year. The big question is how sustainable Chinese steel demand growth will be? This will be highly dependent on the Chinese government's decisions and actions. More than a third of steel demand is accounted for by the property market, of which some 70% is residential property.4 Mortgages accounted for approximately 71% of all new loans in August of this year, down from 90% in July, according to Reuters.5 This loan growth powered the iron ore and steel markets this past 12 - 18 months and China's credit-to-GDP ratio to extremely high levels. The OECD recently observed, "The high pace of debt accumulation was sustained despite weaker domestic demand growth. This raises concerns about the underlying quality of new credit, disorderly corporate defaults and the possible extent to which it has been used to support financial asset prices. Residential property prices in some of the largest cities have risen by over 30% year-on-year, although price growth in smaller cities has been much more modest. The price gains have been partly driven by loose monetary policy and ample credit availability as well as reduced land supply."6 Based on our calculations, Chinese steel demand started showing positive yoy growth in July and, so far, had posted four consecutive months of positive yoy growth from July to October. In September and October, the growth was accelerated to 8.3% and 6.6%, respectively, a clear improvement from the 0.8% yoy growth registered in July. The growth may last another three to six months but could peak sooner, if there are no new stimulus plans announced by the government. In addition to the housing sector, China's auto industry also saw significant demand growth. As China cut the sale taxes on small passenger vehicles from 10% to 5% this year, Chinese car sales jumped 13.6% yoy for the first 10 months of 2016, a significant improvement from a 5.7% yoy contraction in the same period of last year. If the government lets the tax cut expire at year-end, Chinese auto production may decline in 2017, which will weaken Chinese steel demand. In the meantime, Chinese steel producers will keep boosting production next year, which likely will limit the upside for steel prices. That said, current steel inventories in China are still low. According to the China Iron and Steel Association (CISA), steel inventories at large and medium steel enterprises fell 9% from mid-September to late October. This probably will limit the downside for steel prices. Third, we retain a strategic bearish view on both iron ore and steel. If there is no additional reflationary stimulus deployed in 2017, we expect Chinese steel demand to weaken. In the meantime, Chinese steel producers will keep boosting their production. Let these two factors run nine to 12 months, and we believe they will be sufficient to knock down both steel and iron ore prices. Our research last year concluded the Chinese property sector is structurally down-trending.7 Given that the property market is the biggest end user of steel in China, accounting for about 35% of total steel demand, we are strategically bearish on steel and iron ore prices. How To Make Money In The Iron Ore & Steel Market? Chart 4Take Profit On Long ##br##Iron Ore/ShortSteel Rebar Trade We went long May/17 iron ore futures in Dalian Futures Exchange in China and short May/17 steel rebar futures in Shanghai Futures Exchange on October 6 (Chart 4). Both contracts are denominated in RMB. The relative trade gives us a return of 18.1% in two months. We are taking profits with this publication, but we may re-initiate this pair trade on pullbacks. Risks If China deploys additional fiscal and monetary stimulus next year, similar in scope to this year's stimulus, we will re-evaluate our view accordingly. If global iron ore production is less than the market expects we could see further rallies in iron ore prices. Should this occur, we will re-examine our market call, as well. Copper: Market Is Balanced; Little Flex On Supply Side The reflationary stimulus that powered China's property markets - and drove demand for iron ore and steel higher - also propelled copper prices to dizzying heights in 2016H2. We do not expect this juggernaut to continue, and instead expect copper to trade sideways next year as global supply and demand stay relatively balanced (Chart 5). China accounts for roughly half of global refined copper demand (Chart 6). Manufacturing activity has the greatest impact on prices: A 1% increase in China's PMI translates to a 1.8% increase in LME copper prices (Chart 7). Chart 5Copper Market Is In Balance Chart 6World Copper Markets Are Balanced Chart 7China Demand Will Remain Key For Copper China's property market accounts for about a third of global copper demand in used in construction, according to the CME Group, which trades copper on its COMEX exchange. A 1% increase floor-space started in China leads to a 0.3% increase in LME copper prices (Chart 8). The surge in demand from the housing market lifted China's copper demand over the past 12 - 18 months, as credit creation in the form of home-mortgage loans expanded at a rapid clip (Chart 9). We expect the Chinese government to continue to try to rein in a booming property market, which has seen mortgage-loan growth of 90% p.a. recently. If the government is successful, this will limit price gains for copper next year. If not, the bubble will continue to expand in large tier-1 and -2 cities in China, making the copper rally's fundamental support tenous to say the least. Chart 8China PMIs and USD TWI Drive LME Prices Chart 9Mortgage Growth Likely Slows in 2017 This drives our expectation that the real economic activity in China - chiefly manufacturing - will be the dominant fundamental on the demand side for copper next year. On the supply side, we expect 2.65% yoy growth in refined copper production, just slightly above the International Copper Study Group's 2% estimate. Company and press reports cite a reduced mine capacity additions, lower ore content in mined output, and labor unrest as reasons supply side growth is slowing. Our balances reflect a convergence of supply and demand for next year, and also highlight the reduced flexibility in the system to respond to unplanned outages. For this reason, the global copper market could be prone to upside price risk in the event of a major unplanned production outage. Watch Out For USD Strength Copper, like all of the base metals, is sensitive to the path taken by the USD. We continue to expect the Fed to lift rates next month and a couple of times next year. This most likely will lift the USD 10% or so over the next 12 months. This would be bearish for base metals, particularly copper, since 92% of global demand for the red metal occurs outside the U.S. Our modeling indicates a 1% increase in the broad USD trade-weighted index leads to a 3.5% decrease in LME copper prices. A stronger USD will raise the local-currency cost of commodities ex-U.S. EM demand would suffer, which would slow the principal source of growth for base metals. Metals producers' ex-U.S. with little or no exposure to USD debt-service obligations would see local-currency operating costs fall. At the margin, this will lead to increased supply. These effects would combine to push commodity prices lower, producing a deflationary blowback to the U.S. Nickel & Zinc: Going Different Ways In 2017? Zinc has outperformed nickel significantly for the past six years. This year alone, zinc prices have shot up over 90% since January, almost doubling the 50% rally in nickel prices for the same period of time (Chart 10, panel 1). The nickel/zinc price ratio has declined to its lowest level since 1998 (Chart 10, panel 2). Will nickel continue underperforming zinc into 2017? Or will the trend reverse next year? We believe the latter has a higher probability. Tactically, we are bullish nickel and neutral zinc. Strategically, we are bullish nickel and bearish zinc.8 Zinc's bull story has been well-known for the past several years, and nickel's oversupplied bear story also has been commented on in the news. However, both markets' fundamentals are changing. Based on World Bureau of Metal Statistics (WBMS) data, for the first nine months of this year, the supply deficit in the global nickel market was at its highest level since 1996. Meanwhile, the global zinc market was already in balance (Chart 10, panels 3 and 4). Chart 10Nickel Likely To Outperform Zinc In 2017 Chart 11Nickel Has More Positive Fundamentals Than Zinc Both nickel and zinc markets are experiencing ore shortages (Chart 11, panels 1 and 2). For the nickel market, the ore shortage was mainly due to the Indonesian ore export ban, and Philippines' suspension of nickel miners for violating that country's environmental laws. For the zinc market, the ore shortage arose because of several big mines' depletion, years of underinvestment, and mine suspensions due to low prices late last year. The nickel ore shortage will become acute as the Indonesian ban remains in place and the Philippines' government becomes stricter on domestic mining operations. However, for zinc, most of the output loss occurred last year, and actually may be restored to the market in the near future. Zinc prices reached $2,811/MT last year as the market was adjusting to lost supply - the highest level since March 2008. In terms of demand, nickel exhibits much stronger demand growth versus zinc (Chart 11, panels 3 and 4). In addition, China's auto sales tax-cut policy will expire at year-end, which may cause Chinese auto production to fall in 2017. This will affect zinc much more than nickel, as less galvanized steel will be needed next year if Chinese car production falls. Investment Strategies We sold Dec/17 zinc at $2,400/MT on November 3, and the trade was stopped out at $2,500/MT with a 4% loss (Chart 12, panel 1). Zinc prices jumped 11.5% in four trading days in late November, which we believe was mainly driven by speculative buying. Nonetheless, in the near term, global zinc supply is still on the tight side, and zinc inventories are low (Chart 12, panel 2). Zinc prices could rally more in the near term. We were looking to go Long Dec/17 LME nickel vs. Short Dec/17 LME zinc if the ratio drops to 4.3 since mid-November (Chart 13, panel 1). We also suggested that if the order gets filled, put a stop-loss for the ratio at 4.15. Chart 12Zinc: Stay Tactically Neutral Chart 13Risks To Long Nickel/Short Zinc On November 25, the order was filled at the closing price ratio of 4.17. But unfortunately the ratio declined to 4.08 on the next trading day (November 28), based on the closing price ratio, which triggered our predefined stop-loss level with a 2.2% loss. The ratio was trading at 4.17 again as of November 29. As the market is so volatile, we recommend initiating this relative trade if it drops below 4.05 to compensate the risk. If the order gets filled, we suggest putting a 5% stop-loss level for the relative trade. After all, nickel prices could still have pullbacks, as global nickel inventories still are elevated (Chart 13, panel 2). Risks Our strategically bearish view on zinc will be wrong if global zinc ore supply does not increase as much as we expect, or global zinc demand still has robust growth in 2017. Our strategically bullish view on nickel will be wrong if Indonesian refined nickel output increases quickly, resulting in a smaller supply deficit than the market expects. However, due to power shortages, poor infrastructure and funding problems, development on many of the smelters and stainless steel plants once envisioned for the nickel market have been delayed. We believe these problems will continue to be headwinds for Indonesian nickel output growth, and will continue to restrict supply growth going forward. Aluminum: Cautiously Bullish In 2017 Chart 14Aluminum: Remain Tactically Bullish ##br## And Strategically Neutral Sharp supply cuts combined with tight inventories have pushed aluminum prices higher this year. Prices in China have rallied more than 50% so far this year, which was more than double the 20% rise in the global aluminum market (Chart 14, panel 1). This probably indicates a tighter Chinese domestic market than the global (ex-China) market. Looking forward, we remain tactically bullish on LME aluminum prices and neutral on SHFE aluminum prices.9 The supply shortage will likely persist ex-China over next three to six months. Global aluminum production has declined faster than demand so far this year. Based on the WBMS data, global aluminum output was still in a deep contraction in September (Chart 14, panel 2). Even though China's operating capacity has been rising every month so far this year, Chinese total aluminum output for the first 10 months was still 1.1% less than the same period last year. In addition, considering the possible output loss due to the Spring Festival in late January, we believe it will take another three to six months for China to meet its own domestic demand and inventory restocking. Extremely tight domestic inventories should limit the downside of SHFE aluminum prices (Chart 14, panel 3) as the market adjusts on the supply side. We think there is more upside for LME aluminum prices, as the supply shortage will likely persist ex-China over next three to six months. Currently, Chinese aluminum prices are about 18% higher than the LME prices (both are in USD terms), which will likely limit the supply coming from China's exports to the rest of world. Strategically, we are neutral LME aluminum prices and bearish on SHFE aluminum prices. Currently, about 85% of the China's aluminum operating capacity is making money. With new low-cost capacity and more idled capacity coming back on line, profitable Chinese smelters will continue boosting their aluminum production to maximize profits. This, over a longer term like nine months to one year, should eventually spill over to the global market. Investment strategy Chart 15Still Look To Buy Aluminum We recommended buying the Mar/17 LME aluminum contract (Chart 15) if it falls to $1,640/MT (current: $1,721/MT). We expect the contract price to rise to $1,900/MT over the next three to five months. If our order is filled, we suggest a 5% stop-loss. Risks Prices at both the SHFE and LME may come under intense pressure if aluminum producers in China increases their output quickly, even at a small loss, in order to create jobs and revenue for local governments. If global aluminum demand falters in 2017 while supply is rising, we will revisit our strategically neutral view on LME aluminum prices. Ellen JingYuan He, Editor/Strategist ellenj@bcaresearch.com Robert P. Ryan, Senior Vice President rryan@bcaresearch.com 1 Please see Commodity & Energy Strategy Special Report for iron ore and steel "Global Iron Ore And Steel Markets: Is The Rally Over?," dated October 6, 2016, available at ces.bcaresearch.com. In this report, we are using Metal Bulletin iron ore price delivered to Qingdao port in China as our iron ore reference price. 2 Please see "N. China city cuts 32 mln tonnes of steel capacity" published October 30, 2016, by Xinhua's online service, xinhuanet.com. 3 Please see "CHART: The breakeven iron ore prices for major miners in 2016," published June 7, 2016, by Business Insider Australia. 4 Please see "China Resources Quarterly, Southern spring ~ Northern autumn 2016," published by the Australian Department of Industry, Innovation and Science and Westpac, particularly this discussion on p. 4, "The real estate sector." 5 Please see "China August new loans well above expectations on mortgage boom," published by Reuters September 14, 2016. 6 Please see the OECD Economic Outlook, Volume 2016 Issue 2, Chapter 1, entitled "General Assessment of the Macroeconomic Situation," p. 44, under the sub-head "Rapid debt accumulation risks instability in EMEs." The IMF also expressed concern over rising debt levels supporting the real-estate boom in China, particularly in the larger cities, noting, "Credit and financial sector leverage continue to rise faster than GDP, and state-owned enterprises in sectors with excess capacity and real estate continue to absorb a major share of credit flow. The deviation of credit growth from its long-term trend, the so-called credit overhang--a key cross-country indicator of potential crisis--is estimated somewhere in the range of 22-27 percent of GDP..., which is very high by international comparison." Please see the IMF's Global Financial Stability Report for October 2016, "Fostering Stability in a Low-Growth, Low-Rate Era," p. 35, under the sub-heading "China: Growing Credit and Complexities." 7 Please see Commodity & Energy Strategy Special Report "Chinese Property Market: A Structural Downtrend Just Started," dated June 4, 2015 and "China Property Market Q&As," dated July 2, 2015, available at ces.bcaresearch.com 8 Please see Commodity & Energy Strategy Weekly Report "Oil Production Cut, Trump Election Will Stoke Inflation Expectations," dated November 17, 2016 and "The Lithium Battery Supply Chain: Efficient Exposure To Electric-Vehicle Market," dated October 27, 2016, available at ces.bcaresearch.com 9 Please see Commodity & Energy Strategy Weekly Report "Market Saturation Likely In Asia, If KSA - Russia Fail To Curb Oil Production," dated November 10, 2016, available at ces.bcaresearch.com Investment Views and Themes Recommendations Strategic Recommendations Tactical Trades Commodity Prices and Plays Reference Table Closed Trades
Contrary to the almost universal bearish market consensus, we are raising our tactical view on iron ore to bullish from neutral. We remain tactically neutral on the steel market over the next three months. Strategically, we are bearish iron ore and steel.